|
[China]
Trade Verify
Address: 104-604, Building D, Jindao Industrial Park, No. 179 Huizhi Middle Road, Hi-tech Development District, Changsha, Hunan, China.
Contact name:Karl Liang
HUNAN CHARMHIGH ELECTROMECHANICAL EQUIPMENT CO., LTD. |
|
Verified Suppliers
|
|
|
Standard Accessories for CHM-T36VB:
1) Pick and Place MachineCHM-T36VB: 1
2) Juki nozzle: Totally 4pcs (503, 504, 505, 506 size)
3) 8G USB flash 1
4) Power Cord: 1
5) Pull pins: 2
6) Coil for pull pin:1
7) Camera positioning adjust black board: 1
8) Hex wrench: 6
9) Tweezers: 1
10) Brush: 1
11) English user manual: 1
| CHM-T36VB Specifications | |
| Dimensions | 1310mm(L)×710mm(W)×340mm(H) |
| Weight | 50kg |
| Power Supply | AC220V (50Hz, single phase) /AC110V (60Hz, single phase); |
| Air Supply | No external air supply required |
| Vacuum Generation | Built-in vacuum pump |
| Mounting Head Quantity | 2 |
| Mounting Speed | 6000cph(optimal without vision detection); |
| Control Accuracy | 0.025mm |
| Component Type | 0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 10mm(L)×10mm(W)～345mm(L)×360mm(W) |
| PCB Conveying | Manual operation |
| Nozzle Change | Manual operation |
| Control System | External computer required (Windows) |
| Drive System | X&Y-axis driven by stepping motors in the way of closed-loop control realized by encoder; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration; tape puller automatic reset supported |
| Transmission System | Synchronous belt+polished rod+Linear Guides |
| Feeding System | 58 tape feeding stacks(8mm:44,12mm:8,16mm:4,24mm:2；customization supported), 14 preset general IC stacks, work surface custom IC trays and stick feeder supported |
| Vision System | Up-looking camera for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
(1) PCB clamping area: fixing the PCB, let PCB close to left, top
spring should be compacted.
(2) Up camera: Used for calibrating the components position, angle,
so as to improve placement accuracy.
(3) IC material stack: used for place the big IC.
(4) Emergency stop switch: Emergency stop after press down, machine
normal work when clockwise rotation and bounce.
(5) IC tray area: Used for fixing IC tray.
(6) Nozzle & Pull needle: Nozzle used for absorbing materials
and mount on PCB, pull needle used for pull the material go ahead.
(7) Down camera: Used for observing and location, and PCB MARK auto
adjust.
Notes
1.Machines need keeping away from the humid environment and dust,
or which will get on electrical shock and fire.
2.Machines need lying stable platform, or which the shake may lead
to reduce the precision and even turn over and personal injury.
3.Don’t dismounting the machines casually, or the machine may be
broken.
4.Don’t touch the optical axis and the mounting head, or which may
damage the machine and hurt yourselves.
If you have any question,please feel free to contact me!
Tel:+86 18100733752/0731-85504084
Email:sales@charmhigh.com
Skype/WhatsApp/WeChat ID :+86 18100733752
website:Http://en.charmhigh.com
