|
[China]
Trade Verify
Address: 104-604, Building D, Jindao Industrial Park, No. 179 Huizhi Middle Road, Hi-tech Development District, Changsha, Hunan, China.
Contact name:Karl Liang
HUNAN CHARMHIGH ELECTROMECHANICAL EQUIPMENT CO., LTD. |
|
Verified Suppliers
|
|
|
Charmhigh 2023 New Product CHM-550 Desktop SMT 4 Head Pick And Place Machine Samsung Second Hand
Why choose Charmhigh?
Hardware advantage
The design and installation method of the High-end pick and place machine is adopted to solve the deformation of the X-axis due to long-term load operation, ensure long-term working stability, and improve placement accuracy.
Equipped with a 13-position nozzle library, the nozzle can be automatically replaced according to production needs to meet the placement of different devices.
Performance advantages
Thermal compensation: to ensure the stability of the long-term placement of the machine.
https://youtu.be/aJbOOIobP5A
About Hunan Charmhigh Electromechanical Equipment Co., Ltd
https://youtu.be/UAkW3-szWOs
CHM-36VA of Hunan Charmhigh Electromechanical Equipment Co., Ltd
https://youtu.be/VO0ElxOfzDs
CHM-T48VA of Hunan Charmhigh Electromechanical Equipment Co., Ltd
https://youtu.be/qM9ygtwcSrk
CHM-T48VB of Hunan Charmhigh Electromechanical Equipment Co., Ltd
https://youtu.be/bwF2IB5wsbk
CHM-T510LP4 of Hunan Charmhigh Electromechanical Equipment Co., Ltd
https://youtu.be/1B2fvD8cVnk
CHM-T530P4 of Hunan Charmhigh Electromechanical Equipment Co., Ltd
https://youtu.be/Y1f0x5NX3dY
CHM-T560P4 of Hunan Charmhigh Electromechanical Equipment Co., Ltd
https://youtu.be/8EaeZxsTB6Q
CHM-860 of Hunan Charmhigh Electromechanical Equipment Co., Ltd
https://youtu.be/nhidK_omXPw
CHM-861L of Hunan Charmhigh Electromechanical Equipment Co., Ltd
| CHM-550 Specifications | |
| Dimensions | 980mm(L)X 1050mm(W) X 880mm(HD) |
| Weight | 190kg |
| Power Supply | AC220V (50Hz,single phase) 600W |
| Air Supply | 0.5MPa ~0.7MPa |
| Vacuum Generation | Vacuum generator (Japan PISCO) |
| Mounting Head Quantity | 4 |
| Mounting Speed | 6500cph ( Visual inspection) IPC9850: 5000CPH |
| Mounting Accuracy | ±60μm@μ±3σ/chip CPK≥1.0(XY) |
| Control Accuracy | 5μm |
| Component Height | 12mm |
| Component Type | 0201/0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
| PCB Thickness | 0.6mm~3.5mm |
| PCB Size | 400mm(L)×350mm(W) |
| Nozzle Change | Automatic nozzle change (13 hole nozzle library) |
| Control System | Built-in industrial computer (Windows 7) equipped with monitor, keyboard, and mouse |
| Drive System | X&Y axis driven by servo motors;adopting flexible S-curve acceleration and deceleration |
| Transmission System | Ball screw + linear guide |
| Feeding System | 50 Yamaha 8mm standard pneumatic/electric feeder stacks (also suitable for IC tray and stick feeder) |
| Vision System | Snapshot camera×4 (component size applicable: 14mm×14mm); IC camera×1 (component size applicable: 25mm×25mm); Mark camera×2 |
FAQ
1. Whether the linear guide rail and round rod have an impact on
the accuracy of the SMT pick and place machine ?
No impact at all .Using linear guide rail or round rod has no
effect on the accuracy of the mounting machine, the precision of
the mounting machine depends on the motor and software control
system used by the mounting machine only.
2. Is the software control system of your desktop SMT independently
developed by your company?
Yes, our desktop SMT uses Linux system. Linux system supports
cross-platform hardware support, rich software support, reliable
security and stability.
3. Do you use electromagnetic coil to control the pulling needles?
What are the advantages if comparing to cylinder control?
Yes, the drawing needle we use is controlled by the electromagnetic
coil. Comparing with the cylinder control, the electromagnetic coil
control has the characteristics of faster response, softer force
and less noise. The quick reaction can speed up the mounting speed;
Soft strength refers to the strength of the pull needle is soft
when pressing down, and the pull needle is not easy to break.
