Changyi Industrial (Shanghai) Co.,LTD. |
|
• Engine conforms to National Stage II emission standards and
torque converter is optimized, meanwhile it greatly improves
traction force and reduces fuel consumption by 5%.
• With enlarged bucket, the productivity is improved by 12%.
• 18MPa hydraulic system pressure provides high efficiency and
energy saving.
• Heavier counterweight provides larger load capacity.
• Rear-mounted fuel tank provides higher stability.
• Dump height is improved to 3.05m, which is the same as ZL50
loader.
• Brand new design of cooling system meets the requirements for
-20℃ ~ +43℃ ambient conditions.
• Vibration absorption device is mounted with the engine, which
further improves the seal performance and reduces vibration and
noise.
• Working pump and SAE/DIN standard high pressure hoses are made at
Caterpillar’s Wuxi plant, and the pipeline layout is optimized.
• Brand new electric system and circuit layout design and
newly-added low pressure brake alarm improve the reliability and
safety.
• The overall design meets the mandatory noise and safety standards
in China.
Model | SEM636B |
---|---|
Bucket Capacity | 1.5-2.5 m3 |
Rated Load Capacity | 3000 kg |
Operating Weight | 9900 kg |
Max. Drawbar Pull | 98 kN |
Max. Breakout Force | 118 kN |
Max. Gradeability | 28° |
Min. Turning Radius (Outside of Bucket) | 5929 mm |
Min. Turning Radius (Outer Tire) | 5018 mm |
Cycle Time (Bucket lifting, tipping and lowering) | 9.3 s |
Dump Height | 3046 mm |
Dump Reach | 1063 mm |
Wheelbase | 2740 mm |
Standard Dimensions (L×W×H) (mm) | 7120×2440×3137 |
Engine | |
Model | Deutz WP6G125E22 National Stage II emission standards |
Type | In-line, vertical, water cooling, 4-stroke |
Rated Power | 92 kW |
Max. Torque | 520 Nm |
Torque Converter | YJ320B |
Drive System | |
Type | Single stage, 3 elements, centripetal type |
Transmission Type | Fixed axle, constant engaged power shift |
Speed Gears | 4 forward, 2 reverse gears |
Max. Speed | 37.7 km/hr |
Front/Rear Drive Axle | 4WD, fixed front axle, swing rear axle(±12°) |
Steering System | |
Type | Articulated frame, full hydraulic steering |
Steering Angle (left/right) | 38°±1 |
Hydraulic System | |
Hydraulic System Pressure | 18 MPa |
Operation Mode | Mechanical control |
Brake System | |
Service Brake | Single circuit, air-over-oil 4-wheel caliper disc brake |
Parking & Emergency Brake | Pneumatic internal expanding shoe brake |
Tires | |
Size | 17.5-25 |
Volume | |
Fuel Tank | 168 L |
Hydraulic System | 112 L |