|
[China]
Trade Verify
Address: B Area Plant, Productivity building 3rd floor ,Electronic Industrial Park,Yanta District, Xi'an, ShaanXi,China
Contact name:Monica
Shaanxi Kairuihongxing Electronic Co., Ltd. |
|
Verified Suppliers
|
|
|
100mg/h Ceramic Plates Ozone Generator Units
This 100mg/h Ceramic Plates Ozone Generator Units is used to House Ozone Generator Mini Ozone Air Purifier.
Features
1. High-voltage and high-frequency corona discharge, small size transformer, low consumption rate of electricity.
2. Epoxy potting, Damp proof, Waterproof, Corrosion proof transformer.
3. Easy to maintain and install.
4. Long-life ceramic plates are made through green production on 96% aluminum oxide ceramics, with silk-screen discharge resistance of tungsten and molybdenum and other agents, flattened and tin-treated on electrodes after co-firing to high temperature 1650 ℃. High temperature co-firing electrodes and circuits never fall off, and are with excellent moisture and oxidation resistance.
Technical parameter
| Item | 100mg/h Ceramic Plates Ozone Generator Units |
| Ozone output | 100mg/hr |
| Size of ozone plate | 38*16*0.635mm |
| Size of ozone transformer | 60mm*25mm*21mm |
| Input voltage | 12VAC |
| Output high voltage | 3.0~3.5KV 16KHz |
| Power | 3W |
| Generating Method | Corona Discharge |
| Application | Car, RV, Outdoor, Hotel, Garage, Commercial, Household |
| Weight | 0.2KG |
Test conditions:
1. Feed Gas: Dry air or oxygen source recommendated
2. Ambient temperature: ≤10℃, Humidity: <10% (Different
temperature and humidity in the environment will affect the ozone
output and concentration.)
Attention must be paid to the following:
1 Cooling method: Air cooling for transformer and ceramic plate.
2 When ozone generators work, it is necessary to have cooling fans
to blow the ceramic plates and ozone power supplies. When
installing the power supply, please make sure there is 2-3cm high
space between its bottom and the fixed board, so that heat on the
bottom of the power supply can be radiated quickly.
3 This is a high voltage product. Do not touch it when it is
working.
4 Usually after ozone sterilization, it needs 20-30 minutes to
diffuse ozone before anyone enters. And only when the ozone
concentration is or below 0.15ppm, it is permitted to enter.
5 The ozone output test data is based on 95% pure oxygen feeding
and dew point -45°. Different temperature and humidity in the
environment will affect the ozone output and concentration.
Application
It is used in House Ozone Generator Mini Ozone Air Purifier, household air purifier, air fresher, home air purifier, Dryer, dishwasher, shoe cabinet, household disinfectant cabinet, oxygen bar, dehumidifier, refrigerator, domestic appliance and so on.
