Active Member
|
[China]
Address: 260# West Huaian Road, Shijiazhuang, Hebei, China. 050051
Contact name:
Shijiazhuang Minerals Equipment Co. Ltd |
|
|
4/3E-HH High Head Centrifugal Slurry Pumps Used For Cyclone And Filter Press Feeding
1.Introduction of CNSME® SBH75E (4/3E-HH) Slurry Pump:
Type SBH(HH) are hard metal high head slurry pumps designed for heavy duty applications where require high pressures, better for long distance slurry transportation. SME SBH Series pumps are fit for a variety of applications ranging from filter press feeds to pipeline transport staging pumps.
Slurry pump high pressure SBH series of specially developed for pumping medium and high pressure for pumping the sludge to a greater distance. High-pressure slurry SBH Series pump can replace several pumps one. SBH series pump can pump the solution at an average particle size, moreover, the pressure of each step does not exceed 90 meters.
SBH(HH) series high pressure minerals processing hard metal slurry pumps are heavy duty, mainly used for applications with big flow, and high density slurries.
2.The advantages of CNSME® SBH75E (4/3E-HH) Slurry Pump:
1. Anti-corrosive rubber liner has features of wide range of
performance, high efficiency and high performance cost ratio.
2. Rubber discharge end is light, thus easy to install and
maintain.
3. As the name suggests, anti-corrosive rubber liner is made of
rubber which is of high elasticity and chemical stability. The
rubber also absorbs noise and vibration, which is more
anti-corrosive than high chromium alloy
4. Some metallurgy design and research institutes and universities
of science and technology provide lots of technological supports.
Thus, Hebei DELIN rubber discharge end is trustworthy and
effective.
5. A series of quality tests are carried out when rubber mill
discharge liner is being used.
3.Specifications of CNSME® SBH75E (4/3E-HH) Slurry Pump:
| Name | 4/3E-HH |
| Discharge | 3-inch |
| Quantity | 126-252m3/h |
| Head | 12-97m |
| Rated Motor Power | 120Kw |
| Speed | 600-1400r/min |
| NPSH | 2-5m |
| SBH Series Metal Slurry Pump Specifations & Prices | ||||||||||||
| Pump Model | S×D (inch) | Allowable Max. Power (kw) | Material | Clear Water Performance | Impeller | Pricing | ||||||
| Capacity Q | Head H(m) | Speed n(r/min) | Max.Eff. η% | NPSH (m) | No. of Vanes | Vane Dia. (mm) | Weight (kg) | |||||
| Impeller | m3/h | l/s | ||||||||||
| SBH/25C | 1.5×1 | 30 | Metal (A05) | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 5 | 330 | 318 |
| SBH/50D | 3×2 | 60 | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 457 | 750 | ||
| SBH/75E | 4×3 | 120 | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2-5 | 508 | 1250 | ||
| SBH/100F | 6×4 | 260 | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 720 | 2528 | ||
| SBH/100S | 6×4 | 560 | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 720 | 2880 | ||
| SBH/150S | 8×6 | 560 | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4-12 | 711 | 3200 | ||
4.Typical Applications of CNSME® SBH75E (4/3E-HH) Slurry Pump :
Tailings
Heavy Mining
Ash Handling
Cyclone Feeds
Pulp and Paper
Corrosive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Heavy Refusal Removal
