Active Member
|
[China]
Contact name:
Shijiazhuang Shiza Pump Industry Co.,Ltd. |
|
|
Product overview
ZJ series slurry pump is designed by our plant, which is a kind of single stage,end suction,centrifugal type pump.
The 50ZJ slurry pumps maily used transport the abrasive slurry.
The Volute Liner of 50ZJ is made of A49 alloy metal. A49 alloy metal is a high chromium metal with good anti-erosion
performance and corrosion resistance under low pH environment.This characteristic of A49 alloy metal guarantees the
abrasion and Corrosion resistance of the volute, making the pump body not easy to wear through and prolonging
the service life.
Features:
long life service spare parts
High efficiency and low power consumption
Short delivery
ISO9001:2008 passed
Main applications :
This kind of slurry pump spare parts are mainly used in for handling abrasive, high density slurries in the metallurgical, mining, coal, power, building material and other industrial departments.
| (R) | L(R), M | HH | SP(R) | G | AF Series |
| 1.5/1B-(R) | 20A-L | 1.5/1 C-HH | 40PV-SP(R) | 6/4D-G | 2QV-AF |
| 2/1.5B-(R) | 50B-L(R) | 3/2D-HH | 65QV-SP(R) | 8/6E-G | 3QV-AF |
| 3/2C-(R) | 75C-L | 4/3E-HH | 100RV-SP(R) | 10/8F-G | 6SV-AF |
| 4/3C-(R) | 100 D-L | 4/3X-HH | 150SV-SP(R) | 10/8S-G | 8SV-AF |
| 6/4D-(R) | 150E-L | 6/4F-HH | 200SV-SP | 12/10G-G | |
| 6/4E-(R) | 300S-L | 6/4X-HH | 250TV-SP | 14/12G-G | |
| 8/6E-(R) | 350S-L | 6S-H | 14/12T-G | ||
| 8/6R-(R) | 400ST-L | 8/6S-H | 16/14 G-G | ||
| 10/8F-(R) | 450ST-L | 8/6X-H | 16/14TU-GH | ||
| 10/8X-(R) | 10/8 E-M | 6S-HP | 16/14H-GH | ||
| 12/10ST-(R) | 10/8 R-M | 8/6S-HP | 18/16G-G | ||
| 14/12ST-(R) | 8/6X-HP | 18/16TU-GH | |||
| 16/14TU-(R) | |||||
| 20/18G(TU)-(R) |
Pump replaced parts material:
1. Bearing assembly- large diameter shaft with short overhang contributes to long bearing life.
2. Liners – easily replaceable liners are bolted, not glued to the casing for positive maintenance.
3. Casing – casing halves of cast or ductile iron provide high operating pressure capabilities.
4. Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
5.Throat bush – wear is reduced and maintenance simplified by the use of tapered.
Spare parts materials
| NO. | Name | code | Regular material | Alternational materials |
| 1 | Impeller | A05(Cr27) | A49,Rubber,304,316 | |
| 2 | Throatbush | 083 | A05(Cr27) | A49,Rubber,304,316 |
| 3 | Frame plate liner insert | 041 | A05(Cr27) | A49,Rubber,304,316 |
| 4 | Volute liner | 110 | A05(Cr27) | A49,Rubber,304,316 |
| 5 | Expeller ring | 029 | Cast iron | A49,Rubber,304,316 |
| 6 | Expeller | 028 | Cast iron | A49,Rubber,304,316 |
| 7 | Cover plate liner | 018 | Rubber | |
| 8 | Frame plate liner | 036 | Rubber | |
| 9 | Frame plate | 032 | Cast iron | Ductile cast iron |
| 10 | Cover plate | 013 | Cast iron | Ductile cast iron |
| 11 | Base | 003 | Cast iron | Ductile cast iron |
| 12 | 005 | Assorted |
