Home Companies Nanjing FiveMen Machine CO., LTD

Waste Oil Water Separator , Fuel Oil Water Separator 3000r/min Bowl Speed

Nanjing FiveMen Machine CO., LTD
Active Member

Contact Us

[China] country

Address: No. 13, Qingxing Road, Industrial Concentration District, Guli Street, Jiangning Dist., Nanjing, Jiangsu, China (Mainland)

Contact name:Sunny

Inquir Now

Nanjing FiveMen Machine CO., LTD

Waste Oil Water Separator , Fuel Oil Water Separator 3000r/min Bowl Speed

Country/Region china
City & Province nanjing jiangsu
InquireNow

Product Details

Waste Oil Water Separator , Fuel Oil Water Separator 3000r/min Bowl Speed

 

 

Product Description:

 

 

Horizontal screw centrifuge is for 0.002-3mm material for clarification, separation, dehydration, or classify 1um-5um solid phased particles. It is wide application range, work continuously, large processing capacity, low cost, convenient maintenance and so on. It is the best equipment for separating solid-liquid. It is widely used in chemical industry, light industry, medicine, food, paper making, mining and other industries.

 

 

working principle:


Three-phase horizontal screw centrifuge is mainly composed of driving part, drum and spiral conveyor. Compact structure, small volume, its operation, on the basis of principle of settlement, is solid particles which is heavier than the liquid, in a predetermined time to precipitate out. For both proportion difference and not mutually soluble liquid, can also use the same principle. After the material into the high speed rotating drum. The material inside the drum and the drum synchronous rotation. Due to the different proportion, the centrifugal force of different. Big protection solid particles by the centrifugal force is the largest, then the water, dirty oil minimum, so according to size by centrifugal force outside-in formed a concentric solid concentric layer and two layer. Solid launched by screw conveyor, liquid from their drainage mouth out.
 

 

Main parts:

 

 

Main parts 1. Access device 2.drum 3.paring disc device 4.drive system 5.stainless steel cover 6.engine base 7.Motor

(1). Machine starts the friction to start off, about six to ten minutes. The machine runs smoothly, low noise and vibration, the installation path is very easy to operate.

(2) The main strengthen parts of Roller body and Roller cover use 2Cr13, and the other parts of contacted materials such as Disc all use 316L

(3) The Stainless steel cover use SUS304

(4) The base use casting steel, coating does the same way as ship bottom.

 

 

 

Hot Products

LThree Phase Centrifugal Decanter 5400r/Min Speed For Coal Tar Separator Product Description--------...
Waste Oil Water Separator , Fuel Oil Water Separator 3000r/min Bowl Speed Product Description: ...
Industrial three phase fish oil Decanter Centrifuge Fish Oil Extraction Separator Machine Instructio...
304SS Or 316L Decanter Centrifuge Horizontal Screw Discharge Sedimentation Instruction: gravity and ...
Continuous Decanter Centrifuge Machine 15kW For Chemical Industry Instruction: The decanter ...
3 Phase Decanter Separator Vegetable Oil Clarifier Machine LWS355*1200 Instruction: The decanter ...