Continuous waste engine oil purifier oil disc centrifuge separator machine

Descripition:

This kind centrifuge is a separator for separating solid, liquid and liquid for chemical, pharmaceutical, oil, foodstuff, milk industry, daily industry and

defense industry etc.. It has three types for solid discharge such as central value deslagging, artificial deslagging, and water push deslagging. The

first type is mainly used in the desoponificating of oil refining, and the last two types are used in degumming and dehydrating, they are all

applicable for liquid-liquid-solid and liquid–solid separation.

KYDH series separator is mainly applied in the purification and clarification of the diesel, light fuel oil, heavy fuel oil and other mineral oil, to

remove the water, moisture, mechanical impurities and some harmful substances of the oil. This model is automatic slag type, high separation

efficiency, no need to disassemble to slag. It can be automatic controlled according to requirement which greatly reduce the labor intensity of the

operating. This machine by the accurate calibration balancing, little vibration, can be long-running and operated safety and reliable.

Product Applications:

Successful applications:

1 , Separation of methyl ester, glycerin, catalyst, de-soap, methanol

2, Methyl washing

3, Extraction of fatty acids

4, Glycerol desalination

Advantages:

Overload over heat protection

Alarm when the vibration is large

High rotating speed,

accurate dynamic balancing,

long time with low vibration,

safety and security.

Continuous working

Structure

Main parts 1. Access device 2.drum 3.paring disc device 4.drive system 5.stainless steel cover 6.engine base 7.Motor

(1). Machine starts the friction to start off, about six to ten minutes. The machine runs smoothly, low noise and vibration, the installation path is

very easy to operate.

(2) The bearings use imported SKF brand, transducer using Japan brand “ Fuji”

The main strengthen parts of Roller body and Roller cover use 2Cr13, and the other parts of contacted materials such as Disc all use 304.

(3) The Stainless steel cover use SUS304

4) The base use casting steel, coating does the same way as ship bottom.

(5) German burkert brand of the solenoid valves.

(6) PLC Control achieve self -cleaning and automatically discharging.

Main technical parameters