Active Member
|
[China]
Address: No.508 Jinshan Road, Jinshan Industrial Park, Hetang District,Zhuzhou City, China
Contact name:Bonnie
ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD. |
|
|
HRC45 1 Flute 3 Flute Carbide 1-20mm End Mill Cutting Tools for Aluminum
Tungsten Carbide end mills are a type of milling cutter, a cutting tool used in industrial milling applications. We offer a wide variety of Tungsten Carbide cutting tools including end mills and bore machining products. All products are sinter-HIP processed. This process ensures complete metallurgical integrity needed in high-performance end mill.
Milling cutters/end mills are broadly divided into:
1. Square end mill: finish milling or rough milling, milling grooves, removing a large number of blanks, small-area horizontal plane or contour finishing;
2. Ball end milling cutter/end mill: semi-finishing and finishing of curved surface; the small blade can finish milling small chamfer of steep surface/straight wall.
3, Radius end mill: rough milling when the surface change is small, the small concave area is less, and in relatively flat area.
4. Taper end mills: with chamfer, it can be used for rough milling to remove a large number of blanks, and it can also be fine-milled with a small chamfer on the flat surface (relative to the steep surface).
5. Dill
6. Thread mill
7. Formed cutter
Features:
1. The use of new ultra-fine particles of tungsten steel material, with high wear resistance and strength, exclusive high-speed cutting applications for all-round milling cutter.
2. The blade is covered with a coating, the high-speed roughing of the hot material can be finely processed to reduce the number of tool changes.
Specifications
HRC 45 solid carbide end mill
Blade diameter range from 0.5mm to 10 mm, spiral angle 30 degree, hardness HRC 45.
Fine tungsten carbide, WC=90%,CO=10%,TRC>3800N/㎡, ideal for carbon steel, alloy steel and iron mold materials.
HRC 45 2 flute, 3 flute and 4 flute square end mill
2-flute square carbide end mill
| Type | Blade diameter | Blade length | Shank diameter | Total length |
| 1.0x3x4Dx50Lx2F | 1 | 3 | 4 | 50 |
| 1.5x4x4Dx50Lx2F | 1.5 | 4 | 4 | 50 |
| 2.0x6x4Dx50Lx2F | 2 | 6 | 4 | 50 |
| 2.5x8x4Dx50Lx2F | 2.5 | 8 | 4 | 50 |
| 3.0x3x4Dx50Lx2F | 3 | 8 | 4 | 50 |
| 3.5x10x4Dx50Lx2F | 3.5 | 10 | 4 | 50 |
| 4.0x11x4Dx50Lx2F | 4 | 11 | 4 | 50 |
| 3.0x8x6Dx50Lx2F | 3 | 8 | 6 | 50 |
| 3.5x10x6Dx50Lx2F | 3.5 | 10 | 6 | 50 |
| 4.0x11x6Dx50Lx2F | 4 | 11 | 6 | 50 |
| 4.5x13x6Dx50Lx2F | 4.5 | 13 | 6 | 50 |
| 5.0x13x6Dx50Lx2F | 5 | 13 | 6 | 50 |
| 5.5x13x6Dx50Lx2F | 5.5 | 13 | 6 | 50 |
| 6.0x15x6Dx50Lx2F | 6 | 15 | 6 | 50 |
| 7.0x16x8Dx60Lx2F | 7 | 16 | 8 | 60 |
| 8.0x20x8Dx60Lx2F | 8 | 20 | 8 | 60 |
| 9x20x10Dx75Lx2F | 9 | 20 | 10 | 75 |
| 10x25x10Dx75Lx2F | 10 | 25 | 10 | 75 |
| 11x25x12Dx75Lx2F | 11 | 25 | 12 | 75 |
| 12x30x12Dx75Lx2F | 12 | 30 | 12 | 75 |
| 14x35x14Dx100Lx2F | 14 | 35 | 14 | 100 |
| 16x40x16Dx100Lx2F | 16 | 40 | 16 | 100 |
| 18x45x18Dx100Lx2F | 18 | 40 | 18 | 100 |
| 20x45x20Dx100Lx2F | 20 | 45 | 20 | 100 |
3-flute square carbide end mill
| Type | Blade diameter | Blade length | Shank diameter | Total length |
| 1.0x3x4Dx50Lx3F | 1 | 3 | 4 | 50 |
| 1.5x4x4Dx50Lx3F | 1.5 | 4 | 4 | 50 |
| 2.0x6x4Dx50Lx3F | 2 | 6 | 4 | 50 |
| 2.5x8x4Dx50Lx3F | 2.5 | 8 | 4 | 50 |
| 3.0x3x4Dx50Lx3F | 3 | 8 | 4 | 50 |
| 3.5x10x4Dx50Lx3F | 3.5 | 10 | 4 | 50 |
| 4.0x11x4Dx50Lx3F | 4 | 11 | 4 | 50 |
| 3.0x8x6Dx50Lx3F | 3 | 8 | 6 | 50 |
| 3.5x10x6Dx50Lx3F | 3.5 | 10 | 6 | 50 |
| 4.0x11x6Dx50Lx3F | 4 | 11 | 6 | 50 |
| 4.5x13x6Dx50Lx3F | 4.5 | 13 | 6 | 50 |
| 5.0x13x6Dx50Lx3F | 5 | 13 | 6 | 50 |
| 5.5x13x6Dx50Lx3F | 5.5 | 13 | 6 | 50 |
| 6.0x15x6Dx50Lx3F | 6 | 15 | 6 | 50 |
| 7.0x16x8Dx60Lx3F | 7 | 16 | 8 | 60 |
| 8.0x20x8Dx60Lx3F | 8 | 20 | 8 | 60 |
| 9x20x10Dx75Lx3F | 9 | 20 | 10 | 75 |
| 10x25x10Dx75Lx3F | 10 | 25 | 10 | 75 |
| 11x25x12Dx75Lx3F | 11 | 25 | 12 | 75 |
| 12x30x12Dx75Lx3F | 12 | 30 | 12 | 75 |
| 14x35x14Dx100Lx3F | 14 | 35 | 14 | 100 |
| 16x40x16Dx100Lx3F | 16 | 40 | 16 | 100 |
| 18x45x18Dx100Lx3F | 18 | 40 | 18 | 100 |
| 20x45x20Dx100Lx3F | 20 | 45 | 20 | 100 |
4 flute square carbide end mill
| Type | Blade diameter | Blade length | Shank diameter | Total length |
| 1.0x3x4Dx50Lx4F | 1 | 3 | 4 | 50 |
| 1.5x4x4Dx50Lx4F | 1.5 | 4 | 4 | 50 |
| 2.0x6x4Dx50Lx4F | 2 | 6 | 4 | 50 |
| 2.5x8x4Dx50Lx4F | 2.5 | 8 | 4 | 50 |
| 3.0x3x4Dx50Lx4F | 3 | 8 | 4 | 50 |
| 3.5x10x4Dx50Lx4F | 3.5 | 10 | 4 | 50 |
| 4.0x11x4Dx50Lx4F | 4 | 11 | 4 | 50 |
| 3.0x8x6Dx50Lx4F | 3 | 8 | 6 | 50 |
| 3.5x10x6Dx50Lx4F | 3.5 | 10 | 6 | 50 |
| 4.0x11x6Dx50Lx4F | 4 | 11 | 6 | 50 |
| 4.5x13x6Dx50Lx4F | 4.5 | 13 | 6 | 50 |
| 5.0x13x6Dx50Lx4F | 5 | 13 | 6 | 50 |
| 5.5x13x6Dx50Lx4F | 5.5 | 13 | 6 | 50 |
| 6.0x15x6Dx50Lx4F | 6 | 15 | 6 | 50 |
| 7.0x16x8Dx60Lx4F | 7 | 16 | 8 | 60 |
| 8.0x20x8Dx60Lx4F | 8 | 20 | 8 | 60 |
| 9x20x10Dx75Lx4F | 9 | 20 | 10 | 75 |
| 10x25x10Dx75Lx4F | 10 | 25 | 10 | 75 |
| 11x25x12Dx75Lx4F | 11 | 25 | 12 | 75 |
| 12x30x12Dx75Lx4F | 12 | 30 | 12 | 75 |
| 14x35x14Dx100Lx4F | 14 | 35 | 14 | 100 |
| 16x40x16Dx100Lx4F | 16 | 40 | 16 | 100 |
| 18x45x18Dx100Lx4F | 18 | 40 | 18 | 100 |
| 20x45x20Dx100Lx4F | 20 | 45 | 20 | 100 |
Square end mills of other blade diameter and length are possible as per customers’ requirement.
Applications
1. Suitable for Copper, Cast Iron, Carbon steel, Tool steel, Mould steel, Die steel, Stainless steel, Plastic, Arcylic, etc.
2. Applicated for Aerospace, transportation, Medical equipment, military manufacturing, mould development, apparatus and instrument, etc
