ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD. |
|
Cemented carbide is a hard material used in machining tough materials such as carbon steel or
stainless, as well as in situations where other tools would wear away, such as high-quantity production runs. Most of the time, carbide will leave a better finish on the part, and allow faster machining.Carbide tools can also withstand higher temperatures than standard high speed steel tools
1. High accuracy with long lifespan
2. Hip sintered, good performance
3. Various sizes and full types available
4. Products can be customized upon requirement
Application
1. It is suitable for the production of various types electrical machine & electronic progressive dies and punches.
2. It is widely used in ceramics, printing machine, plastic, rubber, leather industry and cutting machines.
Recommended carbide grade
Carbide grade | ISO | CO% | Density | Hardness | TRS |
JT06F | K05 K10 | 6.0 | 14.9 | 93.1 | 3800 |
YL10.2 | K20 K30 | 10.0 | 14.5 | 91.5 | 4000 |
JT12F | K30 K40 | 12.0 | 14.2 | 92 | 4000 |
JT06U | K05 K10 | 6.0 | 14.8 | 93.5 | 3200 |
JT15X | K30 K40 | 15 | 13.8 | 87.5 | 3600 |
Specification of the Tungsten Carbide Rod with hole
Outer diameter | Outer diameter tolerance | | | | | | ||
2.5 | +0.20 | 0.3 | ±0.10 | 0.2 | 330 | 0~+5.0 | ||
4.0 | 1.0 | ±0.15 | 330 | 0~+5.0 | ||||
6.0 | 330 | 0~+5.0 | ||||||
8.0 | 1.5 | 330 | 0~+5.0 | |||||
10.0 | +0.30 | 2.0 | ±0.20 | 0.25 | 330 | 0~+5.0 | ||
12.0 | 330 | 0~+5.0 | ||||||
14.0 | 330 | 0~+5.0 | ||||||
16.0 | 330 | 0~+5.0 | ||||||
18.0 | +0.40 | 3.0 | ±0.25 | 0.30 | 330 | 0~+5.0 | ||
20.0 | 330 | 0~+5.0 | ||||||
22.0 | 330 | 0~+5.0 | ||||||
24.0 | 4.0 | ±0.30 | 330 | 0~+5.0 | ||||
26.0 | 5.0 | ±0.35 | 330 | 0~+5.0 | ||||
28.0 | 330 | 0~+5.0 | ||||||
30.0 | 330 | 0~+5.0 |
~ Customized Tungsten carbide products are available!