Home Companies ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD.

Yg8 Carbide Pulley Yg15 Tungsten Carbide Wire Guide Roll And Carbide Straightening Rollers

Active Member

Contact Us

[China]

Address: No.508 Jinshan Road, Jinshan Industrial Park, Hetang District,Zhuzhou City, China

Contact name:Bonnie

ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD.

Yg8 Carbide Pulley Yg15 Tungsten Carbide Wire Guide Roll And Carbide Straightening Rollers

Country/Region	china
City & Province	zhuzhou hunan
Categories	Tool Parts

Product Details

Yg8 Carbide Pulley Yg15 Tungsten Carbide Wire Guide Roll And Carbide Straightening Rollers

Material composition:
1.Physical Properties:
A) Hardness greater than or equal to 92.8 HRA；
B) Density greater than or equal to 14.2 g/cm³；
C) TRS greater than or equal to 4200 N/mm²；
D) Free of ETA phase condition；
E) No contamination by other materials；
F) Porosity = A00 / B00 / C00 ；
G) Uniform and consistent grain size. No grain size can be larger than specified.
H) Chromium carbide grain growth inhibitor only.
2.All the production, coatings are used in Germany, Switzerland, processing equipment；
3.It's proposed cutting less than 60HRC;

Properties of cemented carbide grades recommended rods
Grade	Chemical composition			Physical data			Grain size of WC(um)
	WC	Co	Others	Density(g/cm³)	Hardness(HV3)	TRS(MPa)
YL10.1	93.5%	6.0%	0.5%	14.88-15.04	1580±50	2500	1.2-1.7
YL10.2	89.5%	10.0%	0.5%	14.4-14.55	1600±50	4000	0.8
YL10.5	89.7%	9.5%	0.8%	14.4-14.55	1550±50	3800	0.7-0.9
YL50	85.0%	15.0%		13.86-14.10	1095	2060	0.4-0.6
YU06	93.0%	6.0%	1.0%	14.7-14.8	2050	3000	0.2-0.4
YU08	91.0%	8.0%	1.0%	14.56-14.65	1900	4000	0.2-0.4
YU09	89.8%	9.0%	1.2%	14.36-14.50	1950	3900	0.2-0.4
YU12	87.0%	12.0%	1.0%	14.05-14.15	1750	4000	0.2-0.4
YF06	93.5%	6.0%	0.5%	14.86-14.96	1800	3800	0.4-0.6
YF08	91.4%	8.0%	0.6%	14.55-14.65	1800	3900	0.4-0.6
YG6X	93.5%	6.0%	0.5%	14.8-15.10	91	1560	1.0
YG8	92.0%	8.0%		14.6-14.9	89.5	1840	1.2-1.6

~ Customized Tungsten carbide products are available!

Type	D(mm)	Tol. Of diameter(mm)	L(mm)	Tol. Of diameter(mm)
￠1.0*330	1.0	+0.2~+0.45	330	0~+5.0
￠2.0*330	2.0	+0.2~+0.45	330	0~+5.0
￠3.0*330	3.0	+0.2~+0.45	330	0~+5.0
￠4.0*330	4.0	+0.2~+0.45	330	0~+5.0
￠5.0*330	5.0	+0.2~+0.45	330	0~+5.0
￠6.0*330	6.0	+0.2~+0.45	330	0~+5.0
￠7.0*330	7.0	+0.2~+0.45	330	0~+5.0
￠8.0*330	8.0	+0.2~+0.45	330	0~+5.0
￠9.0*330	9.0	+0.2~+0.45	330	0~+5.0
￠10.0*330	10.0	+0.2~+0.5	330	0~+5.0
￠11.0*330	11.0	+0.2~+0.5	330	0~+5.0
￠12.0*330	12.0	+0.2~+0.5	330	0~+5.0
￠13.0*330	13.0	+0.2~+0.5	330	0~+5.0
￠14.0*330	14.0	+0.2~+0.5	330	0~+5.0
￠15.0*330	15.0	+0.2~+0.6	330	0~+5.0
￠16.0*330	16.0	+0.2~+0.6	330	0~+5.0
￠17.0*330	17.0	+0.2~+0.6	330	0~+5.0
￠18.0*330	18.0	+0.2~+0.6	330	0~+5.0
￠19.0*330	19.0	+0.2~+0.6	330	0~+5.0
￠20.0*330	20.0	+0.2~+0.7	330	0~+5.0
￠21.0*330	21.0	+0.2~+0.7	330	0~+5.0
￠22.0*330	22.0	+0.2~+0.7	330	0~+5.0
￠23.0*330	23.0	+0.2~+0.7	330	0~+5.0
￠24.0*330	24.0	+0.2~+0.7	330	0~+5.0
￠25.0*330	25.0	+0.2~+0.7	330	0~+5.0
￠26.0*330	26.0	+0.2~+0.8	330	0~+5.0
￠27.0*330	27.0	+0.2~+0.8	330	0~+5.0
￠28.0*330	28.0	+0.2~+0.8	330	0~+5.0
￠29.0*330	29.0	+0.2~+0.8	330	0~+5.0
￠30.0*330	30.0	+0.2~+0.8	330	0~+5.0