Active Member
|
[China]
Address: No.508 Jinshan Road, Jinshan Industrial Park, Hetang District,Zhuzhou City, China
Contact name:Bonnie
ZHUZHOU JINTAI CEMENTED CARBIDE CO., LTD. |
|
|
Milling cutters/end mills are broadly divided into:
1. Square end mill: finish milling or rough milling, milling grooves, removing a large number of blanks, small-area horizontal plane or contour finishing;
2. Ball end milling cutter/end mill: semi-finishing and finishing of curved surface; the small blade can finish milling small chamfer of steep surface/straight wall.
3, Radius end mill: rough milling when the surface change is small, the small concave area is less, and in relatively flat area.
4. Taper end mills: with chamfer, it can be used for rough milling to remove a large number of blanks, and it can also be fine-milled with a small chamfer on the flat surface (relative to the steep surface).
5. Dill
6. Thread mill
7. Formed cutter
Advantages:
1. Using tungsten carbide materials, more wearable and durable.
2. Double-edged belt desigh, and large space for chip removal.
3. The smooth shank has excellent chamfering, which is convenient for installation, it saves the time of changing the tool.
4. Advanced coating after-treatment technology, for closer combination with substrate, lower friction and superior surface quality.
5. With excellent cutting performance in both dry and wet cutting.
Workpiece material:
Non-ferrous alloy, steel, pre-hardened steel, hardened steel, stainless steel, carbon steel, alloy steel, cast iron, titanium alloy, heat resistant alloy etc.
Specifications
HRC 58 solid carbide end mill
Blade diameter range from 0.5mm to 10 mm, spiral angle 30 degree, hardness HRC 45.
Fine tungsten carbide, WC=90%,CO=10%,TRC>3800N/㎡, ideal for carbon steel, alloy steel and iron mold materials.
HRC 58 2 flute, 3 flute and 4 flute square end mill
2-flute square carbide end mill
| Type | Blade diameter | Blade length | Shank diameter | Total length |
| 1.0x3x4Dx50Lx2F | 1 | 3 | 4 | 50 |
| 1.5x4x4Dx50Lx2F | 1.5 | 4 | 4 | 50 |
| 2.0x6x4Dx50Lx2F | 2 | 6 | 4 | 50 |
| 2.5x8x4Dx50Lx2F | 2.5 | 8 | 4 | 50 |
| 3.0x3x4Dx50Lx2F | 3 | 8 | 4 | 50 |
| 3.5x10x4Dx50Lx2F | 3.5 | 10 | 4 | 50 |
| 4.0x11x4Dx50Lx2F | 4 | 11 | 4 | 50 |
| 3.0x8x6Dx50Lx2F | 3 | 8 | 6 | 50 |
| 3.5x10x6Dx50Lx2F | 3.5 | 10 | 6 | 50 |
| 4.0x11x6Dx50Lx2F | 4 | 11 | 6 | 50 |
| 4.5x13x6Dx50Lx2F | 4.5 | 13 | 6 | 50 |
| 5.0x13x6Dx50Lx2F | 5 | 13 | 6 | 50 |
| 5.5x13x6Dx50Lx2F | 5.5 | 13 | 6 | 50 |
| 6.0x15x6Dx50Lx2F | 6 | 15 | 6 | 50 |
| 7.0x16x8Dx60Lx2F | 7 | 16 | 8 | 60 |
| 8.0x20x8Dx60Lx2F | 8 | 20 | 8 | 60 |
| 9x20x10Dx75Lx2F | 9 | 20 | 10 | 75 |
| 10x25x10Dx75Lx2F | 10 | 25 | 10 | 75 |
| 11x25x12Dx75Lx2F | 11 | 25 | 12 | 75 |
| 12x30x12Dx75Lx2F | 12 | 30 | 12 | 75 |
| 14x35x14Dx100Lx2F | 14 | 35 | 14 | 100 |
| 16x40x16Dx100Lx2F | 16 | 40 | 16 | 100 |
| 18x45x18Dx100Lx2F | 18 | 40 | 18 | 100 |
| 20x45x20Dx100Lx2F | 20 | 45 | 20 | 100 |
3-flute square carbide end mill
| Type | Blade diameter | Blade length | Shank diameter | Total length |
| 1.0x3x4Dx50Lx3F | 1 | 3 | 4 | 50 |
| 1.5x4x4Dx50Lx3F | 1.5 | 4 | 4 | 50 |
| 2.0x6x4Dx50Lx3F | 2 | 6 | 4 | 50 |
| 2.5x8x4Dx50Lx3F | 2.5 | 8 | 4 | 50 |
| 3.0x3x4Dx50Lx3F | 3 | 8 | 4 | 50 |
| 3.5x10x4Dx50Lx3F | 3.5 | 10 | 4 | 50 |
| 4.0x11x4Dx50Lx3F | 4 | 11 | 4 | 50 |
| 3.0x8x6Dx50Lx3F | 3 | 8 | 6 | 50 |
| 3.5x10x6Dx50Lx3F | 3.5 | 10 | 6 | 50 |
| 4.0x11x6Dx50Lx3F | 4 | 11 | 6 | 50 |
| 4.5x13x6Dx50Lx3F | 4.5 | 13 | 6 | 50 |
| 5.0x13x6Dx50Lx3F | 5 | 13 | 6 | 50 |
| 5.5x13x6Dx50Lx3F | 5.5 | 13 | 6 | 50 |
| 6.0x15x6Dx50Lx3F | 6 | 15 | 6 | 50 |
| 7.0x16x8Dx60Lx3F | 7 | 16 | 8 | 60 |
| 8.0x20x8Dx60Lx3F | 8 | 20 | 8 | 60 |
| 9x20x10Dx75Lx3F | 9 | 20 | 10 | 75 |
| 10x25x10Dx75Lx3F | 10 | 25 | 10 | 75 |
| 11x25x12Dx75Lx3F | 11 | 25 | 12 | 75 |
| 12x30x12Dx75Lx3F | 12 | 30 | 12 | 75 |
| 14x35x14Dx100Lx3F | 14 | 35 | 14 | 100 |
| 16x40x16Dx100Lx3F | 16 | 40 | 16 | 100 |
| 18x45x18Dx100Lx3F | 18 | 40 | 18 | 100 |
| 20x45x20Dx100Lx3F | 20 | 45 | 20 | 100 |
4 flute square carbide end mill
| Type | Blade diameter | Blade length | Shank diameter | Total length |
| 1.0x3x4Dx50Lx4F | 1 | 3 | 4 | 50 |
| 1.5x4x4Dx50Lx4F | 1.5 | 4 | 4 | 50 |
| 2.0x6x4Dx50Lx4F | 2 | 6 | 4 | 50 |
| 2.5x8x4Dx50Lx4F | 2.5 | 8 | 4 | 50 |
| 3.0x3x4Dx50Lx4F | 3 | 8 | 4 | 50 |
| 3.5x10x4Dx50Lx4F | 3.5 | 10 | 4 | 50 |
| 4.0x11x4Dx50Lx4F | 4 | 11 | 4 | 50 |
| 3.0x8x6Dx50Lx4F | 3 | 8 | 6 | 50 |
| 3.5x10x6Dx50Lx4F | 3.5 | 10 | 6 | 50 |
| 4.0x11x6Dx50Lx4F | 4 | 11 | 6 | 50 |
| 4.5x13x6Dx50Lx4F | 4.5 | 13 | 6 | 50 |
| 5.0x13x6Dx50Lx4F | 5 | 13 | 6 | 50 |
| 5.5x13x6Dx50Lx4F | 5.5 | 13 | 6 | 50 |
| 6.0x15x6Dx50Lx4F | 6 | 15 | 6 | 50 |
| 7.0x16x8Dx60Lx4F | 7 | 16 | 8 | 60 |
| 8.0x20x8Dx60Lx4F | 8 | 20 | 8 | 60 |
| 9x20x10Dx75Lx4F | 9 | 20 | 10 | 75 |
| 10x25x10Dx75Lx4F | 10 | 25 | 10 | 75 |
| 11x25x12Dx75Lx4F | 11 | 25 | 12 | 75 |
| 12x30x12Dx75Lx4F | 12 | 30 | 12 | 75 |
| 14x35x14Dx100Lx4F | 14 | 35 | 14 | 100 |
| 16x40x16Dx100Lx4F | 16 | 40 | 16 | 100 |
| 18x45x18Dx100Lx4F | 18 | 40 | 18 | 100 |
| 20x45x20Dx100Lx4F | 20 | 45 | 20 | 100 |
Square end mills of other blade diameter and length are possible as per customers’ requirement.
Application
1. Suitable for Copper, Cast Iron, Carbon steel, Tool steel, Mould steel, Die steel, Stainless steel, Plastic, Arcylic, etc.
2. Applicated for Aerospace, transportation, Medical equipment, military manufacturing, mould development, apparatus and instrument, etc
