Beijing Silk Road Enterprise Management Services Co.,LTD |
Verified Suppliers
|
|
White Black Iphone Replacement Parts Home Button Flex Cable for Iphone 6 Plus
Size | L12*6*H2.3MM |
Impedance | 6.0OHM±15% |
Rated Resonance Frequency | 750Hz±20% |
Rated Feature Sensitivity Level | 114dB±3 |
Frequency Range | 200-20KHz |
Rated Harmonic Distortion | ≤7% |
Rated Noise Power | 10mW |
Max Power | 30mW |
1. Peel the home button the rest of the way off of the display by
prying gently with a spudger.
2. Use the point of a spudger to carefully separate the home button
cable from the adhesive securing it to the front panel.
3. If the cable doesn't separate easily, apply heat using hair
dryer to soften the adhesive, and try again. Be careful not to
damage the cable.
4. Once all the adhesive has been separated, remove the home button
from the front panel.
5. Gently push the top left corner of the home button up away from the front panel.
6. This membrane is very thin. If you feel like you're going to tear the button, apply mild heat (with a heat gun, or hair dryer) and try again.
7. Use the spudger to disconnect the home button cable connector by pushing it up and away from the home button.