Active Member
|
[China]
Address: Daziwen Town Industrial Zone, Anping County, Hengshui City, Hebei Province
Contact name:admin
Anping Jiongcan Hardware Mesh Products Co., Ltd |
|
|
Platform steel grid is also called platform steel grid plate, platform steel grid plate, is a kind of steel products with flat steel in accordance with a certain distance and cross bar, and welded into the middle with a square grid, mainly used to do the ditch cover plate, steel structure platform plate, steel ladder step plate and so on. The bar is generally made of twisted square steel. Platform steel plate is generally made of carbon steel, hot dip galvanized surface, can play a role in preventing oxidation. It can also be made of stainless steel. The steel grid has the properties of ventilation, lighting, heat dissipation, anti-skid, explosion proof and so on.
| Product Name | Steel Driveway Grates Grating |
| Material | Low carbon steel / Stainless steel |
| Grade | Q235,Stainless steel |
| Bearing Bar (width*thickness) | 25x3, 25x4, 25x4.5, 25x5, 30x3, 30x4, 30x4.5, 30x5, 32x5, 40x5, 50x5, 65x5, 75x6, 75x10…..100 x10mm etc; |
| Bearing bar pitch | 12.5, 15, 20, 23.85, 25, 30, 30.16, 30.3,32.5, 34.3, 35, 38.1, 40, 41.25, 60, 80mm etc. |
| Twisted Cross Bar Pitch | 38.1, 50, 60, 76, 80, 100, 101.6, 120mm, 2'' & 4'' etc |
| Surface treatment | Untreated, hot DIP galvanized, cold DIP galvanized, painted, powder coated, pickling, electrolytic polishing, or as customers’ requirement. |
Application of platform grille:
Widely used in petrochemical, electric power, tap water, sewage
treatment, port wharf, building decoration, shipbuilding,
self-propelled parking lot, municipal engineering, sanitation
engineering and other fields platform, walkway, trestle, trench
cover, manhole cover, ladder, fence and so on.
1: high strength, light structure
2: strong anti-corrosion ability, durable
3: beautiful appearance, bright surface
4: no dirt, no rain and snow, no water, self-cleaning, easy to
maintain
5: ventilation, lighting, heat dissipation, anti-skid,
explosion-proof good
6: easy to install his folding unloading
Pressure welding steel grid plate is made of load flat steel and
cross bar according to a certain distance by adopting 200 tons of
hydraulic resistance welding automation equipment welding into the
original plate, after cutting, opening, wrapping and other
processes and products customer requirements.
Load flat steel spacing: the center distance between two adjacent
load flat steel, commonly used 30MM, 40MM and 60MM three.
Rod spacing: the center spacing of two adjacent bars is usually
50MM, 100MM, two kinds
In order to prevent the risk of falling, the installation of the
steel grid plate should be fixed by welding as far as possible.
The steel grid plate shall be installed in accordance with the
steel structure plate. After installation, it shall not be moved
laterally or separated from the supporting frame. The supporting
length at both ends of the steel grid plate bearing the flat steel
direction on the supporting frame shall not be less than 25 mm for
each section.
Platform steel grille plates that require removable and detachable
are secured by the mounting fixture of the steel grille plates.
Prevent any shift of the member;
The requirements of the buyer can be supplied by the manufacturer.
In addition to the installation clip made of stainless steel
material, the installation clip made of carbon steel is treated by
hot dip galvanizing. It is suggested that the bolts used for the
installation clip are treated by hot dip galvanizing.
