Skid Proof Carbon Steel Driveway Drainage Grates 65x5mm Floor Walkway

Skid Proof Carbon Steel Driveway Drainage Grates 65*5mm Floor Walkway

Oil RIGS Are Skidproof Hot Dip Galvanized Steel Driveway Grates Grating

Steel Driveway Grates Grating Introduction

Hot dip galvanized steel grid plate, also known as hot dip galvanized steel grid plate, is made of low carbon steel flat steel and twisted square steel horizontal and longitudinal welding grid building materials.
Hot dip galvanized steel grid plate has strong impact resistance, strong corrosion resistance heavy load capacity, elegant and beautiful, in the municipal roadbed and steel platform construction projects have superior performance.
High cost performance, hot dip galvanized steel grid is widely used in the old and new roadbed paving ditch road construction projects.
 

Steel Driveway Grates Grating Specifications:

Hot dip galvanizing, cold dip galvanizing, spray painting, no treatment.
Steel grating plate flat steel spacing: 30, 40, 60mm, etc., 30, 40mm is recommended.
Steel grid bar spacing: 30, 38, 50, 76, 100mm, recommended to use 50, 100mm.
Steel grid size: commonly used 6X6MM twisted square steel, small specification galvanized steel grid to take 5X5mm twisted square steel, stainless steel commonly used diameter of 5mm round steel
Spacing of steel plate loaded flat steel: the center distance between two adjacent loaded flat steel, commonly used 30MM, 40MM two kinds.
Steel grating bar spacing: the center spacing of two adjacent bars is usually 50MM, 100, two kinds, can be produced according to customer requirements.

Steel Driveway Grates Grating Application:

Galvanized steel grates are suitable for alloys, building materials, power stations, boilers.
Shipbuilding.
Petrochemical, chemical and general industrial plants, municipal construction and other industries, with ventilation, light, anti-skid, strong bearing capacity, beautiful and durable, easy to clean, easy installation and other advantages.
New bridge steel plate has been widely used in all walks of life at home and abroad.
 
Steel Driveway Grates Grating Advantages:

The surface of hot-dip galvanizing steel grating is treated with special hot-dip galvanizing, and its chemical and physical properties are stable, and it is not easy to be corroded and oxidized by air and microorganisms.It can obviously enhance the trench load force.Prevent collapse.The hot dip galvanized steel grates with flat steel spacing of 3 cm are of great impact resistance and have the characteristics of maximum span.The longer its service life is, it is generally within the range of 40-50 years.Hot-dip galvanized steel grating is a very good steel frame structure and weighing platform if no destructive factors are considered to be involved.

 
Production Process:
Pressure welding steel grid plate is made of load flat steel and cross bar according to a certain distance by adopting 200 tons of hydraulic resistance welding automation equipment welding into the original plate, after cutting, opening, wrapping and other processes and products customer requirements.
Load flat steel spacing: the center distance between two adjacent load flat steel, commonly used 30MM, 40MM and 60MM three.
Rod spacing: the center spacing of two adjacent bars is usually 50MM, 100MM, two kinds
 
Installation Method:
In order to prevent the risk of falling, the installation of the steel grid plate should be fixed by welding as far as possible.
The steel grid plate shall be installed in accordance with the steel structure plate. After installation, it shall not be moved laterally or separated from the supporting frame. The supporting length at both ends of the steel grid plate bearing the flat steel direction on the supporting frame shall not be less than 25 mm for each section.
Platform steel grille plates that require removable and detachable are secured by the mounting fixture of the steel grille plates.
Prevent any shift of the member;
The requirements of the buyer can be supplied by the manufacturer. In addition to the installation clip made of stainless steel material, the installation clip made of carbon steel is treated by hot dip galvanizing. It is suggested that the bolts used for the installation clip are treated by hot dip galvanizing.