Guangzhou HS Machinery Co., Ltd. |
Verified Suppliers
|
|
Data/Model | 1600*3600 | 2200*3600 | 2200*4000 | 2200*4600 | 2200*5200 | 2600*3600 | 2600*4000 | 2600*4600 | 2600*5300 |
Printing Speed(m/min) | 160 | 160 | 160 | 160 | 160 | 160 | 160 | 160 | 160 |
Max.Machine Speed(pcs/min) | 120 | 100 | 100 | 100 | 80 | 80 | 80 | 80 | 80 |
Max.Feeding Size(mm) | 1570x3600 | 2100x3600 | 2100x4000 | 2100x4600 | 2100x5300 | 2500x3600 | 2500x4000 | 2500x4600 | 2500x5300 |
Min.Feeding Size(mm) | 450x760 | 550x900 | 550x900 | 550x900 | 550x900 | 650x900 | 650x900 | 650x900 | 650x900 |
Max. Printing Area(mm) | 1540x3600 | 2080x3600 | 2080x4000 | 2080x4600 | 2080x5300 | 2480x3600 | 2480x4000 | 2480x4600 | 2480x5300 |
Printing Unit
*Roll to Roll transfer, high adaptability of jumbo board, transfer more precisely, improve chromatical precision.
*Pneumatic clutch is adopted on anilox roller
*Transverse register is digitally controlled by motor and PLC.
*Automatic cleaning function guarantees ink recycle and cleaning more easily and quickly.
*Ink leaking & splashing proof system.
*Automatic resetting after cleaning the printing plate.
*Rubber roller inking system
Slotting Unit
1.Pressing line wheel
Adopt seamless steel tube , after two times grinding machining ,
surface of the roller is chromed , move steadily.
The pressing line wheel gap adopt manual adjustment , the adjusting
range is 0-11mm.
2.The slotting knife seat movement structure
1.Adopt seamless steel tube , after two times grinding machining ,
surface of the roller is chromed , move steadily.
2.The slotting knife width is 7.0mm.
3.The slotting knife adopt alloy steel. It also has gone through
heat treatment and grinding , the knife shape is saw tooth. Both
the rigidity and toughness are very good.
4.The repair edge knife adopt alloy steel and has gone through heat
treatment and grinding , the knife is sharp and high precise.
5.The pressing line wheel and the slotting knife moves
synchronously ( through the linkage spanner )
6.The slotting knife seat gap adopts manual adjustment , the
adjusting range is 0-11mm.
7.Two slotting knives adopt manual synchronous adjustment.(the box
height).
2.The slotting phase adjusting structure.
Planet gear structure.
The slotting phase adopt PLC , touching screen and electric
numerical 360 degrees adjustment (both the machine stopping and
running can adjust.)