Corrugated Cardboard Auto High Speed Flexo Printer Slotter Die
Cutter
1. The machine wall thickness 50mm High quality cast iron, made by
high precision process center and grinded by digit- controlled
grinder.
2. Equipped with digital touch screen to display the machine
running situation and have the features of whole machine zero
reset, preset function, printing and die cutting phase zero reset
and adjustment.
3. All the transmission rolls are made of high quality steel with
the chrome plated and grinding surface.
4. Motorized detachment and combination, pneumatic locking and
loosening of each unit, along with alarm ring and light when the
machine unit moving to improve the operation safety.
5. Different alarm ring will along with the machine launching and
stopping.
6. The machine is launched by pressing the start button with two
hands, which ensure the operator's safety.
7. Each unit equips with emergency stop button.
8. There have different color of LED light to indicate the machine
situation of power on, standby, running, and abnormal.
9. Electrical components, transmission bearings and gears,
pneumatic control components etc. are all in accordance with the
national standard.
10. Equipped with automatic lubrication system.
Feeding unit:
1 Separation and combination of the machine : A Control of
separation and combination of machine units is electrically, with
alarm to keep the safety of operatingpersonnel. B There is friction clutch on the transmission shaft, to
avoid damage the machine when mis-operation. C Pneumatic interlock
device. D Main motor is variable-frequency motor.
Variable-frequency control. Energy saving and stable to start.
There is motor start-protected device. 2 Front edge idler wheel
feeding system : A Absorbing feeder. Fan: 11 kw. The air volume can
be adjusted according to the camber of the paperboard to keep
feeding smoothly. B There is interlock control clutch in the
slotting unit to control the scram feeding. C Cylinder drives
sheets up and down. It acts fast and easily. D Front edge idler
wheel feeding system E Location of side baffle and back block box
are adjusted electrically. Clearance of front baffle is adjusted
manually. F Paper skip feeding device. (It can feed skipped or
continuously). G Feeding counter, which set and display the
production quantity. 3 Dust cleaning device : A Brush dust cleaning
device in feeding unit, which can remove most of dust on the
surface of paperboard. It can improve the printing quality.
4 Paper feeding roller :
A Outer diameter of upper roller: Φ86mm. Solid steel, covered with
durable rubber and treated with balance correction.
B Outer diameter of lower roller: Φ155mm. Embossed, hard
chrome-plated, and balance-corrected.
C Feeding roller clearance dial is adjusted manually. Adjusting
range: 0-12mm.
5 Automatic zero reset device
A Electric zero reset device on feeding unit, printing unit,
slotting unit.
B It can be adjusted to the right position after process 2 sheets
of normal carton board. It reduces waste of carton board.
Printing unit:
1 Printing roller (plate roller) A Outer diameter: Φ455mm B Surface
of roller is grinded and hard chrome-plated. C Treated with balance
correction, runs steady and smoothly. D Ratchet stationary rolling
plate axil. E Whole plate hanging slot. The suitable hang plate bar
is: 10mm×3mm. F Printing roller rotation forward or backward is
controlled by pedal switch, when the printing plate is hung up or
taken off. 2 Printing pressure roller A Outer diameter: Φ188mm. B
Surface of roller is grinded and hard chrome-plated. C Treated with
balance regulating, runs steady and smoothly. D Printing pressure
roller clearance dial is adjusted manually. Adjusting range:
0-12mm. 3 Paperboard feeding upper and lower roller A Upper roller:
outer diameter: Φ86mm, thickness steel pipe, attached with 4
feeding rings. B Lower roller: outer diameter: Φ156mm, thickness
steel pipe, the surface is grinded and hard chrome plated. C
Paperboard feeding roller clearance dial is adjusted manually.
Adjusting range: 0-12mm. 4 Steel anilox roller A Outer diameter:
Φ213mm. B Surface of roller is grinded, embossed and hard
chrome-plated. C Treated with balance correction, runs steady and
smoothly. D Automatic pneumatic lifting device, act in with feeding
system. (The anilox roller will go down to touch printing plate,
when the feeder begins to run. It will separate from the plate,
when the feeder stops running.) E There is wedge overrunning clutch
on the anilox roller. It is easy and convenient to even ink and
wash ink. 5 Rubber roller A Outer diameter: Φ210mm. B Surface of
the steel pipe is covered with wear-resistant rubber and it is
after balance correction. C Rubber is medium-high grade special
grind. Ink transfer well. 6 Phase adjust system A Planet gears
structure. B Printing phrase is adjusted electrically in 360° . (It
can be adjusted when running or stopping.) C Lateral width is
adjusted electrically. Total adjusting range is: 14mm. 7 Water ink
circulating A Pneumatic surge pump. It is steady to supply ink and
easy to operate. B Printing ink filter screen to filter out
impurities.C Plastic ink tank. 8 Printing phrase fixing device A Solenoid
brake. B Brake device will stop running of machine when each
sections separate or adjust phrase. It can keep gears at origin
location.
