Active Member
|
[China]
Address: Room 104,Building 3,Poly Yue Mansion, Yingbin Road, Jiyang District,Sanya City, Hainan Province,China
Contact name:christin zhu
Hainan Bojun Trading Co., Ltd. |
|
|
COMPUTER LAYER HELICAL CROSS CUTTER
Structural feature:
★ it can store 200 unit orders, replace the cutter specifications quickly and accurately, change orders without stop, and enables networked computers to facilitate the production management.
★ Knife shaft drive gears are precision-forged steel induction hardening, backlash-free transmission, advanced keyless connection, and high transmission accuracy.
★ The cutting machine adopts an inlaid front steel blade knife spiral structure, serrated knife. scissors, shears, shear force, long blade life.
★ around feed rollers are used the sun gear platen way, smooth delivery, pressure evenly, easy to crush plate board or cause blockage.
★ This model is the braking energy storage (non-dynamic braking), so the energy consumption in the production process, the average electricity consumption is 1/3 of an ordinary NC cutting machine, saving more than 70% power to reach the goal of saving money.
★ Precision adjustable no gap gear to ensure precise blade engagement, and running balance.
★ Using an independent oil pump and filter with two copper distribution in each gear position oil, lubrication, and cooling
★ Knife roller: fine quality forged steel material, balanced, with good stability.
Technical parameters:
| Effective width | 1800mm |
| Design speed | 200m/min |
| Mechanical configuration | computer-control helical cross cutter |
| Minimum cutting length | 500mm |
| Maximum cutting length | 9999mm |
| Cutter accuracy | Uniform for ± 1mm, non-uniform to ± 2mm |
| operation direction: left or right(determined by the customer’s factory) | |
Roller diameter parameters:
| Cross on the knife shaft center distance | ￠216mm |
| Before the lower conveying roller diameter | ￠156mm |
| After the lower conveying roller diameter | ￠156mm |
| The front of the platen roller diameter | ￠70mm |
Note: After all, have been grinding rollers, hard chrome plated at (on except under the knife shaft) dealing.
Power motors and electrical parameters:
| main drive motor power | 37KW Full AC synchronous servo |
| Before and after feeding motor power | 4KW(Frequency Control) |
| Oil pump motor power | 0.25KW |
