Active Member
|
[China]
Contact name:
CORERAY Optical Communication Co.,Ltd. |
|
|
The 1x1 solid state fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configuration s and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate 1x1 fiber optic switch features low insertion loss,high extinction ratio,high channel isolation,and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure,longevity,operation under shock/vibration environment and large temperature variations,and fast response time.The switch also has build-in circulator and isolator functions. Electronic driver is available for this series of switches.
1X1 Optical Switch Features
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path
Latching and Non-latching
1x1 Optical Switch Applications
Optical Signal Switching and Routing
Optical Network Protection and Restoration
Optical Network Monitoring
Video Distribution
Instrumentation Resource Sharing
Military Communications
1x1 Optical Switch Specifications
| Parameters | SOSW-1×2 | |
| Wavelength Range | nm | 1295~1325,1520~1580 |
| Testing Wavelength | nm | 1310/1550 |
| Insertion Loss | dB | Typ:0.7 ,Max:1.0 |
| Return Loss | dB | ≥50 |
| Channel Cross Talk | dB | ≥45 |
| PDL | dB | ≤0.10 |
| Polarization Mode Dispersion | ps | ≤0.20 |
| TDL | dB | ≤0.25 |
| Power Handling | mW | 300 |
| Switching Speed | ms | 50~200 |
| Repeatability | dB | 2K |
| Operating Temperature | °C | -40~+85 |
| Storage Temperature | °C | -40~+85 |
| Dimensions | mm | (L)58.2×(W)8.4×(H)8.4(±0.2) |
Electrical Driving Information
The switch is actuated by applying a voltage pulse. Applying one polarity pulse, one light path will be connected and latched to the position. Applying a reversed polarity pulse, another light path will be connected and latched to the position after pulse removed.
| Parameter | Minimum | Typical | Maximum | Unit |
| Driver Voltage | 4.5 | 5 | 5.5* | V |
| Driver Current | 110 | 140 | 195 | mA |
| Pulse Duration | 0.2 | 0.3 | 0.5 | ms |
Driving kit with USB and TTL interfaces and Windows TM GUI is available. We also offer RS232 interface as an option –please contact coreray sales.
1x1 switch
| Optical Path | Pin 1 | Pin 2 |
| Port 2→Port 1 | 5V Pulse | GND |
| Port 3→Port 1 | GND | 5V Pulse |
1x1 switch
| Optical Path | Pin 1 | Pin 2 |
| Port 1→Port 2 | GND | 5V Pulse |
| Port 1→Port 3 | 5V Pulse | GND |
The typical driver voltage of single stage is 2.5V.
Over this value will damage the device.
Mechanical Dimensions(mm)
Ordering Information:SOSW-1x1-A-B-C-D-E-F-G
| A | B | C | D | E | F | G |
| Type | Mode | Wavelength | Switch | Fiber Diameter | Fiber Length | Connector |
1x1 1x1 1x1 | SM:9/125um | 13:1310nm 15:1550nm | 2:dual stage 0:special | 25:250um 90:900um | 05: 0.5m 10: 1.0m 15: 1.5m | OO:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC |
