The SSMΙΙΙ is a powerful fault diagnosis device (for Subaru
vehicles) that has been developed using the latest advanced
technology. Used in combination with a PC, it provides a tool for
quick and efficient analysis of vehicle faults. Application
software running on a PC provides an interactive user interface for
very simple operation. High-speed communication with the engine
control system and transmission control system help to make
checking of various phenomena faster than ever before.
The SSMΙΙΙ is a fault diagnosis device that provides a standard
means of automotive fault diagnosis. It communicates with the
various system control modules equipped in a vehicle to monitor
control module input/output data, and to allow checking and
deletion of diagnostic codes generated by the controlmodule. It
also provides means to reset control module learning values and
other control parameters, and to force operation of engine control
system actuators.
Features:
All System Diagnosis. Selecting this item displays on a
single screen the fault detect status of all control system control
modules for which SSMΙΙΙ diagnosis is supported, and memorized
diagnostic codes.
Each System Check. Selecting this item makes it possible to
select a particular system from among the control systems forwhich
SSMΙΙΙ diagnosis is supported, and perform fault diagnosis. This
item can be used to view input/output data of the system control
modules that perform fault diagnosis, memorized diagnostic codes,
and other data on the PC display. This menu item is also used after
repair work is complete to delete diagnostic codes, to configure
control module settings, etc.
Saved Data Display. This item can be used to save various
data sampled during fault diagnosis operations, and to load data
for viewing after work is complete.
Immobilizer. This item performs immobilizer registration.
Reprogram. This item performs reprogramming of the control
module.
Read CF application measurement data. This item performs
reading stand alone measurement data saved in a CF card to hard
disk of your PC.
Convert/Save measurement data on driving recorder. Loads data
sampled on the driving recorder to the PC from the CF card, and
converts and saves that data.
Oscilloscope. After attaching the optional pulse/analog
cartridge to SDI, connect the pulse/analog box to the SDI and using
pulse/analog probe to perform analog sampling.
Minimum Computer Operating Requirements:
Operating System: Microsoft Windows 2000/XP
CPU: Intel Pentium M processor; 900 MHz equivalent or higher
recommended
RAM: 256 MB recommended
Available Hard Drive Capacity: 20 GB recommended
Drive: CD-ROM drive
Communications Port: USB port (USB 1.1 or higher)
The SSMΙΙΙ supports five languages: English, French, German,
Spanish and Japanese.
Supported cars: Subaru.
Set includes:
SDI Box
CF Card
USB cable
Diagnostic cable
A/C Adapter
Carrying Case