Active Member
|
[China]
Address: tianxin building 1908 cangzhou city, hebei province, China
Contact name:Sara
Cangzhou Aodong Light Industry Machinery Equipment Co., Ltd. |
|
|
Second Hand High Speed Packing Box Corrugated Carton Cardboard Production Line
Technical Parameters
* Operation style of base paper stand: Electrically mechanical type
* Dia. of clip paper: Φ350mm - Φ1400mm
* Max. weight of one side: 2000kg
* Working pressure of air supply: 0.6-0.9 MPa
* Total power: 5.2kw
Structural Features
A. The symmetric structure can be installed with two bundles of base paper at the same time used to change papers without halt.
B. This machine adopts the electrical driver to finish lifting up or down, clamping, loosening and centering the base paper.
C. This machine adopts the pneumatic tension controller to adjust the tensile force of base paper.
D. The head of clip paper adopts expansion style.
E. The tension control adopts pneumatic braking, which can also be on-line control together with Paper Splicer.
Max. working width
1600mm
Max working steam pressure:
1.0-1.3Mpa
Steam temperature
160—210 centigrade
Power requirements:
380V, 50Hz
Diameter of heating roller
400mm
2.High Speed Fingerless Type Single Facer
Specification:
Max. machine speed | 80m/min |
Economic speed | 60m/min |
Max. working width | 1600mm |
Max working steam pressure: | 1.0-1.3Mpa |
Steam temperature | 160—210 centigrade |
Power requirements: | 380V, 50Hz |
Diameter of corrugated roller | 268mm |
Diameter of Press roller . | 268mm. |
Diameter of preheater roller | 280mm |
Diameter of Glue roller | 215mm |
Diameter of doctor roller | 105mm |
*Design speed: 80m/min.
*Corrugated rollers made of 48CrMo alloy steel, with heat treatment for hardness HRC58-60, surface plated with chrome treatment.
*corrugating roller: Dia.280mm with a drum.
*Press roller: Dia.320mm. with drum.
* Vacuum suction Fingerless design provides perfect flute formation in high speed manufacturing.
* Gimbal driver system. Individual immersion oil gear type drive box, separating dynamic vibrations improve running stability, easy and fast for maintenance
*Gluing roller: surface is embossed with netting design and chrome plated.
*Adjustment of upper corrugated roller, pressure roller and glue roller controlled by pneumatic system.
*With preheating and preconditioning rollers.
3.Overhead Bridge
Vacuum tension control ,Electric paper way control.
4.Single ply Gluing Machine
For Three ply Line With PLC & Auto Adjust Glue
Max. machine speed | 120m/min --150m/min |
Economic speed | 100m/min--120m/min |
Max. working width | 1400mm |
Max working steam pressure: | 1.0-1.3Mpa |
Steam temperature | 160—210 centigrade |
Power requirements: | 380V, 50Hz |
Diameter of glue roller | 242mm |
Diameter fo preheater roller | 300mm |
Diameter of doctor roller | 125mm |
1.High precision engraved applicator roll ensure uniform glue application and less glue consumption.
2.Pressing roller type with high manufacture efficiency, pneumatic control, easy and fast to operate.
3.Auto-circulating glue feeding system is applied to avoid glue depositing.
4.Driving source is from double facer,it can adopt PLC auto adjusting gluing system.
5.The self-preheating device speeds up glue gelling and create a stronger glue .
5.Double Facer
Specification:
| Max. machine speed | 100m/min |
| Economic speed | 80m/min |
| Max. working width | 1600mm |
| Max working steam pressure: | 1.0-1.3Mpa |
| Steam temperature | 160—210 centigrade |
| Power requirements: | 380V, 50Hz |
| Width of heating palte | 600mm |
| Number of heating palte | 9pcs |
| Diameter of press roller | 60mm |
| Thickness of belt | 10mm |
*Heating plate:1700mm(L)×600mm(W)×120mm(H)×9pcs
Made of steel plate, polish plate.
*Steam pipe for heating plate, divided into 4 sectionsn respectively.
*The heating temperature for each section can be showed .
*For adjusting the tension of upper cotton belt with:
one set pneumatic adjusting device.and one set manual adjusting device; Air cylinder:dia.160mmx250mm stroke.
*For adjusting the tension of lower cotton belt with: one set manual adjusting device.
*For guiding the upper cotton belt with: one set manual adjusting device.
DRIVE ROLL STAND 1 SET
*Upper roller: Dia.500mm×1700mm(L)
wrapped by wear-resisting asbestos cloth.dr
*Lower roller: Dia.440mm×1700mm(L)
wrapped by wear-resisting asbestos cloth.
*Cotton belt pinch roller: Dia.320mm×1500mm(L)×2pcs
| Width | 1600mm |
| Cutting lenth | 500—9999mm |
| Order keeping | 999orders |
| Cutting precision | ±1mm |
| Power | 11kw |
| Knive roller diameter | 190mm |
| Max.production speed | 100m/min |
Machine Introduction:
-Special structure type, high quality wallboard and seat, reliable and slinky.
-With watch-window on two sides wallboard, easy for see in manufacturing and maintenance.
-Driving part adopts hermetic lubricate, make sure high precision, high stability.
-Adopts high precision and rigidity lapping gear, suit for high speed, oil felt lubrication prolong work-life. Ensure cutting blade accuracy meshing, carton sheets without raw edges.
-High precision cutting shaft and cutting seat, reliable and slinky.
-Special structure design in changing blade, easy and fast to change blade.
-Whole system design C.E standard strictly, pass industry computer test strictly, ensure high quality, long work life and stability.
-Driving part adopts AC servo drive, drive system made in Germany, high quality and swift.
-Use in frequency electric system, save electric and could overcome power unstable.
-The system had automatic check function, and could prevent equipment mangled by operate out of the rules or cursoriness operation.
-Computer could automatic adjust cutting acceleration according paperboard size and manufacture speed, automatic follow paperboard’s speed, ensure in-phase.
- Computer could storage 999 different cutting orders, and could in order or priority choose cutting order.
-Equip with touch screen display and PLC control system.
