Cangzhou Aodong Light Industry Machinery Equipment Co., Ltd. |
A. Main technical parameters
1. Max production width: 1600mm
2. Design Speed: 180m/min
3. Economic speed: 150m/min (3-ply)
120-100/min (5-ply)
Annotation: the Kraft paper for testing of the corrugation plant
line should keep the requirements as follows. (The temperature of
the surface of the heating parts in the corrugation plant line is
above 172 degree)
Kraft paper’s level can not be lower than B level Water content:
11%±2%
Face Paper: 100—250g/m2 Bottom Paper:100--250g/m2 Flute Paper:
100—250g/m2
4. Flutes combinations: A, C, B, E (or choose by the customer)
5. Steam requirements:
Steam cost: 2500—3000Kg/Hr Max pressure: 1.2Mpa
Practical Pressure: 0.8-1.1Mpa
6. Power supply: 380V 50Hz (Three phase four wire system)
7. Total Power: About 219kw
Practical power cost: About 185kw
8. Area of the Production Line covers: About 83m×12m×5m (The
specific length is based on the foundation drawing)
9. Corrugated board stacking direction: left or right according to
the workshop to make sure the drive in left direction or right
direction.
10. Equipment suitability: Kraft paper A, B, C native paper or
imported Kraft paper.
B The parts that the customers should buy or prepare by themselves:
1 Steam heating system: suggest buying a 4000kg/hr steam boiler,
pressure: 1.25Mpa, steam pipe.
2 Air compressor, air-pipe, and the glue transport pipe.
3 Electric power source, power wires connect from operation counter
to power counter, and wire and pipe.
4 Water source, water transport pipe, water bucket
5 Water, electric, gas, ground work and civil work.
6 The material paper and corn starch (potato), caustic soda, borax
are used when the 1st testing of the production line.
7 Lubricating oil, consistent lubricant, machine oil, hydraulic
oil.
8 Provide food, accommodation of the installer and offer workers
when installing
Use and Features
The corrugated paperboard production line is composed of shaftless mill roll stand ,fingerless type single facer (vacuum suction type ), preheater ,double bridge ,gluer machine ,double facer machine ,cut off machine ,slitter scorer machine ,stacker and glue making systerm. Our company absorbs advanced technology from other countries ,gets feed backs from our users and bases on our more than 30 years experience in carton machinery to develop the new products. The feature of our machine : high automatization ,easy operation and maintenance ,high efficiency ,good quality of paperboard ,compact structure and nice appearance.
FEATURES
Passed ISO9001-2000 certificate.
Passed CE certificate.
Corrugated paperboard production line as follows is available here.
Width:1400mm-2500mm
Layers: 2ply, 3ply, 5ply, 7ply
Speed: 60m/min-200m/min, mainly produce higher speed line.
Crucial machines: Vacuum Single Facer, shoes type Double Facer, NC
Slitter Scorer, NC Helical Knife Cut Off, NC Stacker are all can
satisfy high running requirement. Unique machine: Twin Facer is one
kind of special single facer, it owns two flutes, and flute change
can be finished in 1 minute. This machine is a new breakthrough in
paperboard making field, and supply a gap for multi-function Single
Facer. Now Twin Facer is the first choice for single face
corrugated paperboard line and multi-wall corrugated paperboard
line.