Active Member
|
[China]
Address: tianxin building 1908 cangzhou city, hebei province, China
Contact name:Sara
Cangzhou Aodong Light Industry Machinery Equipment Co., Ltd. |
|
|
Auto Folder Gluer Machine With Adjustment
Auto Folder Gluer Machine With Adjustment
Adjustment instructions: According to size and position of the
cardboard, adjust the left and right positions of the glue box to
match the glue position of the cardboard.
According to the thickness of the cardboard, adjust (1) ,so that
the cardboard is in contact with the bottom coating wheel. Base on
needs,adjust (3) to control the glue amount. Observe (4) the glue
position in time,(2) the diaphragm pump automatically circulates
the glue.
4. Conveyor Belt Adjustment:
1) Adjust the belt gap
ment instructions:According to the thickness of cardboard, The gap between the two belts here can be adjusted height of the upper pressing wheel
When there is no paper feeding, according to the situation .The gap can be adjusted appropriately. If it is caused by the low pressure of the middle pressing roller, the U-shaped pressing belt can be adjusted Set the studs and adjust the appropriate pressure. When misfeeding occurs, it can be adjusted appropriately according to the situation. Tighten the side or tighten the loose side. The overall gap should not be too tight and balanced to.
(2) Adjust the tightness of the conveyor belt
