Active Member
|
[China]
Address: tianxin building 1908 cangzhou city, hebei province, China
Contact name:Sara
Cangzhou Aodong Light Industry Machinery Equipment Co., Ltd. |
|
|
WJ100-1800-3PLY CORRUGATED CARDBOARD PRODUCTION LINE CONFIGURATION LIST
No. | Name | Qty | Feature |
1 | RS Electrical Mill Roll Stand ( with trolley and track) | 3 | --Toothed chuck,manual discbrakes,pneumatic mechanically actuated
lift,panning left and right on the middle --Guide rail length is 4500 mm, the trolley adopt 10 mm plate welding |
2 | PH-60 Pre-heater | 2 | --The roller φ600 mm,Electric adjustment angle,adjusting heating
area within the range of 360 ° |
3 | SF-A10 Single Facer | 1 | --Corrugated rollerφ 280mm, 48CrMo high quality alloy steel,plating
chromed --Independent gearbox,universal joint drive structure --Cylinder control lifting --Pneumatic control glue,circulating supply glue |
4 | OBH Conveying Bridge | 1 | --The main beam is connected with the GB 200 channel steel, 150H
steel, 63 angle steel --Independent frequency motor drive paper conveying --Suction tension and electric correcting |
5 | Duplex Pre-heater | 1 | --The rollerφ600 mm,electric adjustment angle angle,adjusting
heating area within the range of 360 ° |
6 | GM-15 Glue Machine | 1 | --Glue roller φ269mm,carved 25 line pit type mesh --With preheater device --Independent frequency motor drive --Circulating supply glue with PLC control --Man-machine interface display |
7 | DF-40 Double Facer | 1 | --Main frame is 360 mm GB channel steel --Hot plate 600 mm 9 pics with plating chrome --4 M cooling section --Adopt pressure bar lifting by pneumatic control --The upper belt correct automatically --Frequency motor drive |
8 | SS-E Electric Blade Machine | 1 | --Blade adopt tungsten alloy steel --Electric adjusting and correcting --Automatically grinding --5 blade 8 line |
9 | Cut-Off(Straight) | 1 | --Full AC servo control --Energy storage type braking --Straight knife structure --Oil-immersed gear transmission --10.4-inch touch screen display |
10 | LS Sheet Delivery Machine | 1 | --Electrical adjust the size of cardboard --Cardboard transverse output controlled by pneumatic; --Max stacking height 200mm |
11 | Glue Making System | 1 | --Customers supply the pipeline --The glue making device includes: carrier tank,main body tank,storage tank,glue feeding pump and returning pump |
12 | Internal Steam System | 1 | --Steam system components adopt GB valve: Contains rotary joint,up
and down distributor ,drain valve and pressure gauge, etc --Boiler and pipeline supply by customer |
*It can be loading two paper rolls at the same time, without
stopping the machine for changing paper roll
*The whole machine moving use 5 motor fully electric controlled,
electric control arm lift and down, clamping and open, left and
right moving
*Tension control: manual or pneumatic discbrakes
*The chuck adopt inner expansion type or teeth type, reduce the
destruction of the paper core. saving paper
*Two tracks for one mill roll stand to feed the reel paper at both
side to reel stand
*With Trolley:under trolley have four contact roller,two pieces
railing track
*The whole body of track is under the ground, main frame: Model 14
channel steel with ¢ 20 mm drawing bar weld together,overall length
4500 mm
*Electric to adjust the wrap angle, preheating area can be in 360°
range
*butterfly seal structure on two sides,saving the steam and
improving heating efficiency
*Soft siphon style structure,making the drainage more thoroughly
*All the surfaces of rollers have been accurate ground and plating
chromed
--Corrugated rollerφ280 mm, 48 CrMo high quality alloy
steel,plating chromed
--Independent gearbox,universal joint drive structure
--Cylinder control lifting
--Pneumatic control glue,circulating supply glue
