MKarte Material Technology (Tianjin) Limited |
Verified Suppliers
|
|
Rpvc coated overlay 0.06mm HICO/LOCO Strips card film Magnetic Stripe For Loyalty Cards
Production Specification
1.Rpvc coated overlay 0.06mm HICO/LOCO Strips card film Magnetic Stripe For Loyalty Cards- Introduction |
Rpvc coated overlay 0.06mm HICO/LOCO Strips card film Magnetic
Stripe For Loyalty Cards is applied with standard magnetic stripe. It applies the
high-quality magnetic stripe made by LUCKY China. It can be
directly laminated with the printing sheets in the card laminator
before punched into standard magnetic card. It features high
adhesion, no color change and deformation with long aging life
after the process of lamination.
2. Rpvc coated overlay 0.06mm HICO/LOCO Strips card film Magnetic Stripe For Loyalty Cards - Specification |
Specifications:
Product name | A4 Size Black Magnetic Stripes Coated Overlay Sheet For Plastic Card Lamination |
Common size | A4, 310x480mm (A3, customized ) |
Thickness | 0.04mm -1.0 mm |
Appearance | transparent |
Coated | glue on back |
Laminating temperature | 110-150℃ |
Storage | -10~35℃, sealed, moisture-proof |
Shelf life | 2 years |
Packing method | 100pcs/bag, 4000pcs/carton |
3. Rpvc coated overlay 0.06mm HICO/LOCO Strips card film Magnetic
Stripe For Loyalty Cards - Product Parameter |
The technical Parameters:
Model number | MCO-MS |
Thickness | 0.04 mm,0.05mm,0.06mm ,0.08mm ,0.10mm |
Common Size | Sheet size or Roll size, any size as your requirement |
Color | Clear (Transparent) |
Glue Coated | Yes |
Application | Magnetic strip Card Making |
Type | Heat press |
Advae | Waterproof, Moistureproof, Customized layout |
Packaging method | By standard export carton and packed in strong plywood pallet with proper soft protection material inside, suitable for long distance for sea or air transport |
4. Rpvc coated overlay 0.06mm HICO/LOCO Strips card film Magnetic
Stripe For Loyalty Cards - Application |
In manufacturing process, Magnetic Stripe PVC Film can be directly
laminated with PVC printing sheet, simplify the fabrication process
to save time.
Steps to make cards:
1).Put printing core and two overlays together, then put into the
laminator.
(The laminating temperature and time is determined as per the
instruction of the machine). Please be noticed that all glue sides
of both PVC sheets and overlays are put inward.
2).Lamination lasts 10-15 minutes (6-8Mpa 125-140℃).
3).Cutting.