High Power Engine Flush Machine For Motor Food Grade High Precision Filter

Engine Oil Cleaner Flush DC12V Oil System Flush With Filter Design

When do you change the lubricant?

All oils have a shelf life, and lubricants are no exception. It is best to change the oil when the new car and the newly repaired vehicle are about 2,500 km, which will help to better remove the metal debris generated by the engine during the running-in period. General mineral oil or semi-synthetic lubricating oil, the replacement cycle is 5000-7500 km, and the total synthesis is 8000-10000 km. The oil filter is usually replaced at the same time as the oil is changed, because the oil filter has been contaminated with impurities for a long time.

Premature oil change can cause unnecessary waste, and prolonged oil change timing can cause early engine wear and carbon deposition, and the oil will be gradually oxidized and fail.

Parameter

Function

1. Fully automatic cycle cleaning, the addition of the machine and the car form a new dynamic cycle

2. The cleaning time can be set according to the specific conditions, such as the degree of pollution of the car lubricant and the mileage.

3. Externally designed food grade high-precision filter cotton filter to ensure cleaning effect

Advantage

1. The oil changer requires only 20 minutes to change the oil.

2. Dynamic circulation cleaning can remove sludge and impurities from the interior of the car, oil passages, etc.

3. Simultaneous combination of oil change and cleaning functions, saving time and efficiency