SGS Bright Sliver 304 Stainless Steel Sheets 1250mm Stainless Steel
Sheet Metal
SGS Bright Sliver 304 Stainless Steel Sheets 1250mm Stainless Steel
Sheet Metal, Stainless steel sheet metal can be quite thin, but for
it to qualify as “sheet metal” it only reaches a ¼ inch in
thickness -- after that, the metal is referred to as “plate.” The
thickness of and stainless sheet metal is measured by gauge. The
higher the gauge number, the thinner the sheet.
1. Material:
2. Size:
1220X2440 MM | 1500X3000 MM | 1500X6000 MM | 1000X2000 MM |
2000X6000 MM | 4X8 FT | 5X10 FT | 5X20 FT |
914X2000 MM | 1800X6000 MM | 4''X8'' | 5''X10'' |
5''X20'' | 48''X96'' | 60''X120'' | 60''X240'' |
We have a professional processing factory to cut stainless steel
sheets.
3. Surface:
No.4 | It has good gloss and fine lines on the surface. Processing
technology: Polishing and tempering rolling of 2D products or 2B
with 150 ~ 180 abrasive material (JIS R6002). |
HL | It is silver-gray with hair streaks. Processing technology: Polish
the 2D product or 2B product with a suitable size of abrasive
material to make the surface appear continuous grain. |
8K | It is in a mirror state. Processing technology: 2D or 2B products
are ground and polished to a mirror effect with a suitable abrasive
material. |
2B | It is silvery white and better gloss and flatness than 2D surface.
Processing technology: hot rolling + annealing shot peening
pickling+ cold rolling + annealing pickling + quenching and
tempering rolling. |
BA | The surface gloss is excellent and has a high reflectivity, just
like the mirror surface. Processing technology: hot rolling
+annealing shot peening pickling + cold rolling + annealing
pickling + surface polishing + quenched and tempered rolling. |
1D | surface has discontinuous particles, also known as matte.
Processing technology: hot rolling + annealing shot peening
pickling +cold rolling + annealing pickling. |
2D | It is slightly shiny silvery white. Processing technology: hot
rolling + annealing shot peening pickling + cold rolling +
annealing pickling. |
No.3 | has better gloss and rough surface. Processing technology:
Polishing and tempering rolling of 2D products or 2B with 100 ~ 120 abrasive materials (JIS R6002). |
SB | The surface is smooth, the texture is clear, the texture is
delicate, the appearance is comfortable, and the taste is
high-grade.It is widely praised by consumers especially in kitchen
appliances. |
.
You could also ask for other special treatment.We have a stainless
steel processing factory in Wuxi.
4. Standard:
GB JIS ASTM EN DIN AISI
5. Packing:
Standard stainless steel shipping packaging or as customer required.