|
[China]
Trade Verify
Address: Room 101 and 201, No. 18 Workshop, Phase 1 project of Zhongnan Hi Tech Zhuzhou Intelligent Manufacturing Industrial Park, No.329, Xinma West Road, Tianyuan District, Zhuzhou City, Hunan Province.China
Contact name:Tracy
Zhuzhou Gold Sword Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
The cemented carbide is formed by powder metallurgy,
heated under vacuum, and undergoes the vacuum dewaxing sintering
process, which is beneficial to remove impurities, improve the
purity of the sintering atmosphere, improve the wettability of the
binder phase, promote the reaction, and finally form a compact with
a certain chemical The composition and physical and mechanical
properties of the structure of cemented carbide.
| GRADE | ISO | DENSITY | HARDNESS | TRS | Applications recommended |
| GRADE | (g/cm3) | (HRA) | (N/mm2) | ||
| YG3 | K05 | 15.1 | 92 | 1400 | Suitable for finishing of cast iron and nonferrous metal. |
| YG6X | K10 | 14.95 | 91.5 | 1800 | The finishing & semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel. |
| YG6 | K15 | 14.95 | 90.5 | 1900 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| YG8 | K20 | 14.8 | 89.5 | 2200 | |
| YW1 | M10 | 13.1 | 91.6 | 1600 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel. |
| W2 | M20 | 13 | 90.6 | 1800 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs. |
| YT15 | P10 | 11.4 | 91.5 | 1600 | Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed. |
| YT14 | P20 | 11.6 | 90.8 | 1700 | Suitable for the finishing and semi-finishing of steel and cast steel. |
| YT5 | P30 | 12.9 | 90.5 | 2200 | Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
Carbide rods are mainly used for drills, end mills, and reamers. It can also be used for cutting, punching and measuring tools. It is used in paper, packaging, printing, non-ferrous metal
processing industries. In addition, it is also widely used in machining high-speed steel
tools, carbide milling cutters, carbide tools, cutting tools,
aviation tools, carbide drills.
Characteristics: high hardness,wear resistance, good strength and
toughnesss,heat resistance,corrosion resistance.
The production process of cemented carbide strips, first of all,
the production and shaping process of the strips, what kind of mold
and raw materials are used, according to the shrinkage coefficient
and the required product specifications, design the pressing
thickness, pressing unit weight, pressure, holding time, etc. .
Actual manufacturing process,After receiving the process sheet, the
operator first takes the material, checks the equipment, weighs the
unit weight, then fills and scrapes the material, and then presses
and forms under the pressure of the pressure cylinder, and then
demolds, and the pre-formed product comes out. .
