Zhuzhou Gold Sword Cemented Carbide Co., Ltd. |
Verified Suppliers
|
|
Pins are customized according to drawings, non-standard shaped products,Grinding products
Product information
Product number: YG8 tungsten-cobalt alloy special-shaped
customization
Executive standard: GB/T5231-2001
Chemical composition:
W | Co | impurity | Flexural strength | Hardness | Specification | Impact toughness | Density |
92% | 2% | 0 | kn/mm2 1500 | 89HRA | customized | σK/(J/cm2):2.5 | 14.5-14.9 |
Product use: Mainly used for drawing dies for wire and bar
processing. At the same time, it is also suitable for rough
turning, fine planing and finishing milling of cast iron,
non-ferrous metals and their alloys and non-metallic materials with
uneven surfaces and intermittent cutting, drilling of general and
deep holes, reaming and making woodworking tools, etc.
Treatment process: tungsten-cobalt solution infiltration method
Theoretical weight table (unit: kg/m, mm): 14.5
YG8 is a tungsten-cobalt-based material. Good abrasion resistance,
use strength and impact toughness are better than YG6. Drawing dies
under high stress conditions, suitable for drawing steel with a
diameter of <50mm, non-ferrous metal wires and their alloy wires
or bars, and also used for small size stamping dies and rivet top
forging dies with low working load . YG8 molding material. Without
heat treatment, the inner and outer hardness is uniform.
Production field