Hard Alloy carbide Strips blank from china
has high hardness and high wear resistance, it is a ideal choice to
used in cutting kinds of wood.
With high quality raw material and advanced equipment, G.S.carbide
provides customer superior quality Alloy carbide strips blank .
1.Easy to be brazed, good wear resistance and toughness.
2.Untrafine grain size raw material to keep excellent strength and
hardness.
is used as the cutter for the TCT woodworking knives for cutting
all kinds of original wood , hard wood , HDF, MDF , plywood ,
particle board , laminated board, composite material ,grass,
aluminum and metals . It can give much more excellent performance
than HSS .
3.Both standard sizes and customizes sizes are available.
Product Description:
Hard Alloy carbide Strips K20 blank has high hardness and high wear
resistance, it is a ideal choice to used in cutting kinds of wood.
With high quality raw material and advanced equipment, G.S.carbide
provides customer superior quality carbide strips.
1.Easy to be brazed, good wear resistance and toughness.
2.Untrafine grain size raw material to keep excellent strength and
hardness.
3.Both standard sizes and customizes sizes are available.
About Hard Alloy carbide Strips blank :
The main composition of Hard Alloy carbide Strips blank or strips
is tungsten carbide powders and cobalt powders .With its wear
resistant and corrosion resistant ability , tungsten carbide
nowadays is widely used in many areas such as : cutting tools ,
moulds , oil and automobile industry etc .
Tungsten carbide strip and bars is used as the cutter for the TCT
woodworking knives for cutting all kinds of original wood , hard
wood , HDF, MDF , plywood , particle board , laminated board,
composite material ,grass, aluminum and metals . It can give much
more excellent performance than HSS .
GSGrade | ISO Grade | Density (g/cm3) | Hardness (HRA) | T.R.S (MPα) | Grain Size | Performance & Application Recommended |
RX10 | K20 | 14.6-15.0 | 90~90.5 | 2200~2400 | Medium | High hardness, suitable for roughing of iron, solid wood, dry wood
or nonferrous metal, ceramic and other alloys. |
RX20 | K30 | 14.6-15.0 | 90~90.5 | 2600~2800 | Fine | High toughness, easy to be brazed without heat preservation.
Suitable for rosewood, solid wood, pinewood, and other wood with a
lot stammer. |
RX10T | K10 | 14.6-15.0 | 92.5~93 | 1800-2000 | Ultrafine | High hardness, suitable for finishing of iron, nonferrous metal,
ceramic and other alloying, semifinishing of of hardwood,
chipboard, MDF and HDF. Better to use silver soldering. |
AB10 | K40 | 13.8-14.2 | 87.5~88 | 2800~3000 | Coarse | High toughness, difficult to break tooth. Special used for finger
jointing tool. |
size
TICKNESS | WIDTH | LENGTH |
mm | mm | mm |
3~20 | 10 | 50~1020 |
3~20 | 15 | 50~1020 |
3~20 | 20 | 50~1020 |
3~20 | 25 | 50~1020 |
3~20 | 30 | 50~1020 |
3~20 | 40 | 50~1020 |
3~20 | 45 | 50~1020 |
3~20 | 55 | 50~1020 |
3~20 | 60 | 50~1020 |
3~20 | 75 | 50~1020 |
1~20 | 13 | 50~600 |
1~20 | 14 |
1~20 | 15 | 50~600 |
1~20 | 16 | 50~600 |
1~20 | 18 | 50~600 |
1~20 | 20 | 50~600 |
1~20 | 25 | 50~600 |
1~20 | 30~75 | 50~600 |