|
[China]
Trade Verify
Address: Room 101 and 201, No. 18 Workshop, Phase 1 project of Zhongnan Hi Tech Zhuzhou Intelligent Manufacturing Industrial Park, No.329, Xinma West Road, Tianyuan District, Zhuzhou City, Hunan Province.China
Contact name:Tracy
Zhuzhou Gold Sword Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
Cast Iron Steel Tungsten Carbide Inserts Cutting Tools High Wear Resistant
Carbide Indexable Inserts are widely used in manufacturing. Used for or cast iron,steel, high hardness steel,high speed steel,stainless steel ,non-ferrous metal and heat resistant alloy turning,threading, milling,grooving,trenching etc
YG6 / YG8 : Suitable for the roughing pf cast iron and light alloys and also for the milling of cast iron and low-alloy steel
YW2 : Can be used fr the semifinishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs
YT14 : Suitable for the finishing and semifinishing of steel and cast steel.
YT5 : Suitable for the heavy duty rough tuming of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions
YS25 : It is special in using for the milling of steel and cast steel
YC30S : Used for the milling of steel ,cast steel and alloy steel.
YC40 : Suitable for the heavy duty turning of steel and cast steel with a big feel rate under unfavorable working condition.
YC45 : Suitable for the heavy duty turning of steel and cast steel with a big feel rate.also for face milling.
| TYPE | Dimension ( mm ) | |||||||
| L | I.C | S | d | r | ||||
| CNMA | ( ISO ) | ( ANSI ) | ||||||
| 90304 | 321 | 9.7 | 9.525 | 3.18 | 3.81 | 0.4 | ||
| 90308 | 322 | 9.7 | 9.525 | 3.18 | 3.81 | 0.8 | ||
| 120404 | 431 | 12.9 | 12.7 | 4.76 | 5.16 | 0.4 | ||
| 120408 | 432 | 12.9 | 12.7 | 4.76 | 5.16 | 0.8 | ||
| 160608 | 542 | 16.1 | 15.875 | 6.35 | 6.35 | 0.8 | ||
| 190612 | 643 | 19.3 | 19.05 | 6.35 | 7.94 | 1.2 | ||
| TYPE | Dimension ( mm ) | |||||||
| L | I.C | S | d | r | ||||
| CCMT | ( ISO ) | ( ANSI ) | ||||||
| 60202 | 21.5 | 6.4 | 6.35 | 2.38 | 2.8 | 0.2 | ||
| 60204 | 21.51 | 6.4 | 6.35 | 2.38 | 2.8 | 0.4 | ||
| 09T304 | 32.51 | 9.7 | 9.525 | 3.97 | 4.4 | 0.4 | ||
| 09T308 | 32.52 | 9.7 | 9.525 | 3.97 | 4.4 | 0.8 | ||
| 120404 | 431 | 12.9 | 12.7 | 4.76 | 5.5 | 0.4 | ||
| 120408 | 432 | 12.9 | 12.7 | 4.76 | 5.5 | 0.8 | ||
| TYPE | Dimension ( mm ) | ||||||
| L | I.C | S | d | r | |||
| CNMG | ( ISO ) | ( ANSI ) | |||||
| 90304 | 321 | 9.7 | 9.525 | 3.18 | 3.81 | 0.4 | |
| 90308 | 322 | 9.7 | 9.525 | 3.18 | 3.81 | 0.8 | |
| 120404 | 431 | 12.9 | 12.7 | 4.76 | 5.16 | 0.4 | |
| 120408 | 432 | 12.9 | 12.7 | 4.76 | 5.16 | 0.8 | |
| 160608 | 542 | 16.1 | 15.875 | 6.35 | 6.35 | 0.8 | |
| 190612 | 643 | 19.3 | 19.05 | 6.35 | 7.94 | 1.2 | |
| TYPE | Dimension ( mm ) | ||||||
| L | I.C | S | d | r | |||
| CNMM | ( ISO ) | ( ANSI ) | |||||
| 90304 | 321 | 9.7 | 9.525 | 3.18 | 3.81 | 0.4 | |
| 90308 | 322 | 9.7 | 9.525 | 3.18 | 3.81 | 0.8 | |
| 120404 | 431 | 12.9 | 12.7 | 4.76 | 5.16 | 0.4 | |
| 120408 | 432 | 12.9 | 12.7 | 4.76 | 5.16 | 0.8 | |
| 160608 | 542 | 16.1 | 15.875 | 6.35 | 6.35 | 0.8 | |
| 190612 | 643 | 19.3 | 19.05 | 6.35 | 7.94 | 1.2 | |
Tungsten carbide insert 's grades and usages
| Grade | Density g/cm³ | Hardness HRA | T.R.S Mpa | Applications | ISO code |
| YG6 | 14.9 | 89.5 | 1670 | Suitable for the roughing pf cast iron and light alloys and also for the milling of cast iron and low-alloy steel | K15 |
| YG8 | 14.6 | 89 | 1840 | K20 | |
| YW2 | 12.9 | 90.5 | 1460 | Can be used fr the semifinishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs | M20 |
| YT14 | 11.4 | 90.5 | 1400 | Suitable for the finishing and semifinishing of steel and cast steel. | P20 |
| YT5 | 12.8 | 89.5 | 1560 | Suitable for the heavy duty rough tuming of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions | P30 |
| YS25 | 13 | 90.5 | 1780 | It is special in using for the milling of steel and cast steel | P20 |
| YC30S | 12.9 | 90 | 1600 | Used for the milling of steel ,cast steel and alloy steel. | P30 |
| YC40 | 12.9 | 91 | 2200 | Suitable for the heavy duty turning of steel and cast steel with a big feel rate under unfavorable working condition. | P35-P40 |
| YC45 | 12.75 | 90 | 2300 | Suitable for the heavy duty turning of steel and cast steel with a big feel rate.also for face milling. | P40 |
Tungsten Carbide Inserts Feature
High Wear Resistant
High Impact Resistant
Excellent Hardness
High Temperature Resistance/Great High Temperature Performance
Multi-coated
High Precision
Competitive Price
Quality Assurance.(Every piece of insert are inspected.)
Good After-sale service
Convenient Payment Terms and Shipments
