|
[China]
Trade Verify
Address: Room 101 and 201, No. 18 Workshop, Phase 1 project of Zhongnan Hi Tech Zhuzhou Intelligent Manufacturing Industrial Park, No.329, Xinma West Road, Tianyuan District, Zhuzhou City, Hunan Province.China
Contact name:Tracy
Zhuzhou Gold Sword Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
About the carbide cemented
Cemented carbide is a hard material used extensively as cutting tool material, as well as other industrial applications. It consists of fine particles of carbide cemented into a composite by a binder metal. Cemented carbides commonly use tungsten carbide (WC), titanium carbide (TiC), or tantalum carbide (TaC) as the aggregate. Mentions of "carbide" or "tungsten carbide" in industrial contexts usually refer to these cemented composites.
The Features and the uses of cemented carbide
| Mark | ISO standard | Density g/cm³ | Hardness HRA | Bending strength ≥ MPa | Grain size | Features and notice | use |
| RX20 | K05 | 14.5 | 91.2 | 2100 | fine | Comprehensive properties, high hardness and high strength alloys widely used in woodworking field | Suitable for all types of wood processing, also for the processing of metal and non-metal materials |
| RX10T | K10 | 14.5 | 91.8 | 1800 | fine | The cutting edge is sharp and the wear resistance is very good. It is easy to crack at high temperatures. It is recommended to use high frequency induction welding or automatic welding machine. | It is suitable for the cutting of high-density boards, high-fiber boards and particleboards for woodworking tools. It is also suitable for finishing and semi-finishing of cast iron, non-ferrous metals and alloys. |
| RX10 | K10 | 14.75 | 90.5 | 2200 | medium | Good wear resistance and impact resistance, resistance welding can be used. | It is used for impact-resistant and nail-proof cutting of dry wood, cork, mixed wood and cement board, and is suitable for all types of forming knives in the furniture manufacturing industry. |
| YG6X | K10 | 14.9 | 90.8 | 1950 | fine | Good abrasion resistance | It is suitable for machining cold hard cast iron and heat resistant alloy, also suitable for finishing common cast iron. It is used to make casing cemented carbide tools and wear resistant parts. |
| YG6 | K20 | 14.95 | 90.5 | 2000 | medium | It has good wear resistance and impact toughness. Resistance welding can be used, but the welding temperature should not be too high. | It is suitable for the processing of ordinary cutting wood saws, cast iron aluminum profiles and copper rods. |
| YG8 | K20 | 14.80 | 89.5 | 2000 | medium | It has good wear resistance and impact toughness. Resistance welding can be used, but the welding temperature should not be too high. | It is suitable for the processing of non-ferrous metal profiles, dry wood, cork and hardware tools. Suitable for making ordinary sawtooth, it can also be used to make wear parts, general holes and metal processing. |
| YG8Ak | K20 | 14.75 | 90.0 | 2200 | medium | Wear resistance and hardness are good, resistance welding can be used, but welding temperature should not be too high. | Suitable for the processing of hardwood and ordinary wood |
| YG8C | K30 | 14.75 | 88.5 | 2300 | thick | Good impact toughness | Suitable for artificial marble, common wood with weeds, weeds and thickets. |
Products profile
