|
[China]
Trade Verify
Address: Room 101 and 201, No. 18 Workshop, Phase 1 project of Zhongnan Hi Tech Zhuzhou Intelligent Manufacturing Industrial Park, No.329, Xinma West Road, Tianyuan District, Zhuzhou City, Hunan Province.China
Contact name:Tracy
Zhuzhou Gold Sword Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
Rectangular Cemented Carbide Wear Strips With 100% Virgin Raw Material
Cemented Carbide Wear Strips Details:
1. The purity of raw materials is over 95%, the impurity content is very small, and the physical properties of the board are more stable.
2. Using spray drying technology, the material is protected by
high-purity nitrogen under the condition of full sealing, which
effectively reduces the possibility of oxygenation during the
preparation of the mixture, the purity is better, and the material
is not easy to be dirty.
3. Uniform density of sheet: It is pressed by 300Mpa isostatic
press to effectively eliminate the occurrence of pressing defects,
and the density of sheet blank is more uniform.
4. The compactness of the sheet is excellent, and the strength and
hardness indexes are excellent: the ship low-pressure sintering
technology is used to effectively eliminate the pores inside the
sheet and the quality is more stable.
Cemented Carbide Wear Strips Applications
Usually used for general wood cutters / hard wood cutters ,plastic and tobacco cutting
Production in a range of woodworking tools , plane, hop cutter ,sub-cutter etc
Our company use advanced molding process in order to produce various of strips /blanks to
Meet client’s requirements .
| GSGrade | ISO Grade | Density (g/cm3) | Hardness (HRA) | T.R.S (MPα) | Grain Size | Performance & Application Recommended |
| RX10 | K20 | 14.6-15.0 | 90~90.5 | 2200~2400 | Medium | High hardness, suitable for roughing of iron, solid wood, dry wood or nonferrous metal, ceramic and other alloys. |
| RX20 | K30 | 14.6-15.0 | 90~90.5 | 2600~2800 | Fine | High toughness, easy to be brazed without heat preservation. Suitable for rosewood, solid wood, pinewood, and other wood with a lot stammer. |
| RX10T | K10 | 14.6-15.0 | 92.5~93 | 1800-2000 | Ultrafine | High hardness, suitable for finishing of iron, nonferrous metal, ceramic and other alloying, semifinishing of of hardwood, chipboard, MDF and HDF. Better to use silver soldering. |
| AB10 | K40 | 13.8-14.2 | 87.5~88 | 2800~3000 | Coarse | High toughness, difficult to break tooth. Special used for finger
jointing tool. |
Cemented Carbide Wear Strips Advantage:
1. Over 10 Years' efforts in making high quality tungsten carbide bars and strips, Almost 8 years in doing importing and exporting business.
2. Rich experience in grade researching, mould designing, automatic press, HIP sintered, surface treating and quality control.
3. We have many years of experience in producing the Cemented Carbide Strips Blank tungsten carbide strips and have gained a wide reputation in the market . Welcome your inquiry anytime .
