|
[China]
Trade Verify
Address: Room 101 and 201, No. 18 Workshop, Phase 1 project of Zhongnan Hi Tech Zhuzhou Intelligent Manufacturing Industrial Park, No.329, Xinma West Road, Tianyuan District, Zhuzhou City, Hunan Province.China
Contact name:Tracy
Zhuzhou Gold Sword Cemented Carbide Co., Ltd. |
|
Verified Suppliers
|
|
|
Polished Surface Carbide Wear Strips / Metal Cutting Tungsten Square Bar
Description:
Polished Surface Carbide Wear Strips is a new technology and new
material which is mainly used in metal cutting tools manufacturing,
wood, plastics required hardness and wear resistance and corrosion
resistant products manufacturing and other industries.
Tungsten Carbide products are widely used as tool material, such as
turning tool, milling cutter, planer knife, bit, boring cutter,
etc., used for cutting cast iron, non-ferrous metal, plastics,
chemical fiber, graphite, glass, stone and ordinary steel, also can
be used for cutting refractory steel, stainless steel, high
manganese steel, tool steel and other difficult materials.
Tungsten Carbide round rod is a tungsten steel round rod.In simple
terms, a tungsten steel round rod or a hard alloy round
rod.Tungsten carbide round bar/rod has high hardness, wear
resistance, good strength and toughness, heat resistance, corrosion
resistance and a series of excellent properties, especially its
high hardness and wear resistance. Even at 500 ℃ temperature,
itself is basicly remains the same. There are still very high
hardness at 1000 ℃.
Hard Alloy Bars Blank or strip has high hardness and high wear resistance, it is a ideal choice to used in cutting kinds of wood.
With high quality raw material and advanced equipment, G.S.carbide provides customer superior quality carbide strips.
Grade:
| GSGrade | ISO Grade | Density (g/cm3) | Hardness (HRA) | T.R.S (MPα) | Grain Size | Performance & Application Recommended |
| RX10 | K20 | 14.6-15.0 | 90~90.5 | 2200~2400 | Medium | High hardness, suitable for roughing of iron, solid wood, dry wood or nonferrous metal, ceramic and other alloys. |
| RX20 | K30 | 14.6-15.0 | 90~90.5 | 2600~2800 | Fine | High toughness, easy to be brazed without heat preservation. Suitable for rosewood, solid wood, pinewood, and other wood with a lot stammer. |
| RX10T | K10 | 14.6-15.0 | 92.5~93 | 1800-2000 | Ultrafine | High hardness, suitable for finishing of iron, nonferrous metal, ceramic and other alloying, semifinishing of of hardwood, chipboard, MDF and HDF. Better to use silver soldering. |
| AB10 | K40 | 13.8-14.2 | 87.5~88 | 2800~3000 | Coarse | High toughness, difficult to break tooth. Special used for finger jointing tool. |
About Us
Zhuzhou Gold Sword Cemented Carbide Co., Ltd. located in Zhuzhou city, Hunan province, which is the largest cemented carbide production and sales base in China. Our main products are carbide strips, carbide STB bars, carbide sand breaking strips, carbide ASA brazing tips, carbide cold heading dies and carbide rods. Our professional and technical personnel all have above 15 years of cemented carbide production experience, the rich experience can provide our customers of high-quality products and thoughtful technical support, and continuous improvement to meet customer needs.
