Home Companies Hunan Golden Globe I&E O.E.D Co., Ltd.

1400mm Solid Tungsten Carbide Plates Bars For Paper Knives

Active Member

Contact Us

[China]

Address: 1403 Sector A, Yaohua plaza, 412007 Zhuzhou, Hunan Province, China

Contact name:Nat Zhou

Hunan Golden Globe I&E O.E.D Co., Ltd.

1400mm Solid Tungsten Carbide Plates Bars For Paper Knives

Country/Region	china
City & Province	zhuzhou hunan
Categories	Tool Parts

Product Details

1400mm Solid Tungsten Carbide Strips For Paper Knives Metal Cutting Plates

L mm	W mm	T mm
330	27.8	2.6
424	27.8	2.6
465	27.8	2.6
500	27.8	2.6
560	27.8	2.6
640	27.8	2.6
800	27.8	2.6
1000	27.8	2.6
1200	27.8	2.6
1400	27.8	2.6

Tolerance for length +0./+5.0

Width: +0/+0.25

Thickness +0/+0.15

Straightness ＜0.20

Grade K40, with Cobalt: 8%

Tic/Tac: 0.6

Density: 14.45

Hardness: 3800

Grain size: Fine

OED Carbide strips:

Suitable for cutting wooden, metal, plastic, rubber, and so on.

Advanced formulation manufacturing process,
Wire cutting
Anti-corrosion properties of discharge processing
High-speed stamping resistance
High wear resistance

OED recommended grades:

Application Code	Chemical Composition			Physical and mechanical properties and microstructure as sintered						Application recommended
	Co	Tic/ Tac	WC	Density	Hardness	Transverse rupture strength	Coercivity	Magnetic saturation	Porosity
	Co	Tic/ Tac	WC	g/cm³	HV 30	N/mm2	KA/m	%
K05	6	0.3	93.7	14.94	1650-1750	≥1560	19.5-24.5	5.1-5.9	A02 B00	For machining super-hard grey cast steel, hardening steel, chilled iron, high silicon-aluminum alloy, high wear-resistant plastic, hard paper plate and ceramics.
K05	6	2	92	14.95	1350-1500	≥1600	21.5-26.5	4.9-5.9	A02 B00
K10-K15	6	0.4	93.6	14.91	1665-1835	≥1230	19.5-24.5	5.2-6.2	A02 B00	For machining cast iron with hardness higher than 200HB, short-chip forgeable cast iron, silicon-aluminum alloy, copper alloy, plastic, glass, ceramics, and stones.
K20	6	0.4	93.6	14.9	1600-1700	≥1670	16.3-19.2	5.2-6.0	A02 B00	For machining grey cast iron with hardness lower than 200HB, non-ferrous metal, copper, brass, and aluminum
K20	7.8	1	91.2	14.61	≥1400	≥2000	15.0-18.0	6.6-7.8	A02 B00
K30	6	2	92	14.8	1450-1600	≥1320	13.5-15.1	5.3-6.0	A02 B00	For machining low-hardness grey cast iron, low-strength steel and compact wood.

Our advantages:

CIP forming.

CIP Forming can eliminate the internal defects of raw sintered carbide blanks in particular. It can provide uniform density suppression products for the thick carbide strips/plate and special shape carbide products.

Cryogenic process

The internal stress can be removed through the cryogenic process to improve the microstructure.

Vibration process

The internal stress can be removed through the vibration process to improve the overall performance.

Heat treatment

The service can be improved through the heat treatment process.

CIP forming.
CIP Forming can eliminate the internal defects of raw sintered carbide blanks in particular. It can provide uniform density suppression products for the thick carbide strips/plate and special shape carbide products.

Why choose us for carbide wear parts:

Professional production equipment. From spray drying towers, extrusion molding, mold molding, injection molding, CIP, HIP sintering furnaces, flat grinders, heartless grinders, round grinders, EMD cutting, polishing machines, etc. OED can provide reliable quality assurance for your products.
The strict control of the production processing. From raw materials, sintering, processing, we will strictly test each process, non-conforming products will not enter the subsequent production.
Proficient technical team. Senior carbide raw materials engineers: To analyze whether the product meets your application requirements. Senior production managers: To study the most suitable for your product processing methods. Skilled technical inspectors: To test whether the finished product meets your drawing requirements.
Reliable service. Not only can we provide pre-sales technical services, but our engineers can also come up with product improvements to provide the most reasonable solution for your product.
Low-cost sample development. For trial orders, such as quantity below 10pcs, our engineer team can help customers to find the solution with mold fees. In this way, our customers can try the samples at a minimized cost.
Fast delivery. Standard products could be delivered in one week, and the special carbide tools could be finished in 25-45 days after confirming the drawings or 3D model.