|
Trade Verify
Address: Xixiashu Industrial Zone,Xinbei District,Changzhou City,Jiangsu Province,China
Contact name:KING
Changzhou Xinpeng Tools Manufacturing Co.,Ltd |
|
Verified Suppliers
|
|
|
Aluminum Ball Mill Cutter For Aluminum Plastic Multi Size Can Be Optional
KTC Ball Nose End Mills for Aluminum
Specifications
A380CR high gloss aluminum milling cutter series adopt domestic high-quality fine grain tungsten steel material, flexural strength: 4100mpa, grain size: 0.8 μm, not easy to break the edge. A new special aluminum milling cutter with color coating is introduced, which increases the wear resistance of the cutter. The unique groove design and the polishing treatment of the front cutting edge and groove are adopted to increase the cutting performance. It is especially suitable for efficient and high gloss machining of aluminum alloy (6 and 7 series aluminum) materials.
| Raw Material | K30 / YL10.2 |
| TRS | >4100N/mm2 |
| Hardness | >91HRA |
| A.O.L | 50mm-150mm |
| Grain size | 0.8 μm |
| Upto | HRC50 |
| Flutes No | 3F |
| Suitable for | Aluminum,plastic and other materials |
Standard Sizes
| Size | Flute Length of End Mills(mm) |
| Aluminum Use | |
| D1*D4*50 | 2 |
| D1.5*D4*50 | 3 |
| D2*D4*50 | 4 |
| D2.5*D4*50 | 5 |
| D3*D4*50 | 6 |
| D3*D3*50 | 6 |
| D3.5*D4*50 | 7 |
| D4*D4*50 | 8 |
| D1*D6*50 | 2 |
| D1.5*D6*50 | 3 |
| D2*D6*50 | 4 |
| D2.5*D6*50 | 5 |
| D3*D6*50 | 6 |
| D3.5*D6*50 | 7 |
| D4*D6*50 | 8 |
| D6*D6*50 | 10 |
| D6*D6*50 | 12 |
| D7*D8*60 | 14 |
| D8*D8*60 | 16 |
| D10*75 | 20 |
| D12*75 | 24 |
| D14*100 | 28 |
| D16*100 | 32 |
| D18*100 | 36 |
| D20*100 | 40 |
Flute Length of Extended End Mills(mm)
| |
| D3*D4*75 | 6 |
| D4*D4*75 | 8 |
| D5*D6*75 | 10 |
| D6*D6*75 | 12 |
| D8*75 | 16 |
| D3*D4*100 | 6 |
| D4*D4*100 | 8 |
| D5*D6*100 | 10 |
| D6*D6*100 | 12 |
| D8*D8*100 | 16 |
| D10*100 | 20 |
| D12*100 | 24 |
| D6*D6*150 | 12 |
| D8*D8*150 | 16 |
| D10*150 | 20 |
| D12*150 | 24 |
| D14*150 | 28 |
| D16*150 | 32 |
| D18*150 | 36 |
| D20*150 | 40 |
End mills
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
