|
Trade Verify
Address: Xixiashu Industrial Zone,Xinbei District,Changzhou City,Jiangsu Province,China
Contact name:KING
Changzhou Xinpeng Tools Manufacturing Co.,Ltd |
|
Verified Suppliers
|
|
|
20mm 22mm 25mm HSS End Mill Bit For HSS Cutting High Precision
Description
Specifications:
HSS550 high-performance high-speed steel milling cutter is made of M42 material, with low vanadium content (around 1%) and high cobalt content (≤8%). High speed steel milling cutter with cobalt content is commonly used for cutting materials which is hard to cut. Especially suitable for ordinary medium and low carbon steel, alloy steel and other materials processing.
| Raw Material | M42 |
| WC | 92% |
| Co | 8% |
| Hardness | >88HRA |
| A.O.L | 50mm-150mm |
| Upto | HRC45-50 |
| Flutes No | 2/3/4F,4F Rough Edge |
| Suitable for | ordinary medium and low carbon steel, alloy steel and other materials processing |
Standard Sizes
| No.of Flute | Sizes | No.of Flute | Sizes | No.of Flute | Sizes |
| 2F | 1.0×6×4×60 | 2F, 3F, 4F | 1.5×6×7×51 | 3F, 4F | 1.5×6×4×60 |
| 2F | 1.5×6×4×60 | 2F, 3F, 4F | 2×6×7×51 | 3F, 4F | 2×6×11×60 |
| 2F | 2/3×6×11×60 | 2F, 3F, 4F | 3×6×8×52 | 3F, 4F | 3×6×11×60 |
| 2F | 4×6×12×60 | 2F, 3F, 4F | 4×6×11×55 | 3F, 4F | 4×6×12×60 |
| 2F | 5×6×15×60 | 2F, 3F, 4F | 5×6×13×57 | 3F, 4F | 5×6×15×60 |
| 2F | 6×6×19×63 | 2F, 3F, 4F | 6×6×13×57 | 3F, 4F | 6×6×19×63 |
| 2F | 7×8×22×66 | 2F, 3F, 4F | 7×8×19×69 | 3F, 4F | 7×8×22×66 |
| 2F | 8×8×22×66 | 2F, 3F, 4F | 8×8×19×69 | 3F, 4F | 8×8×22×66 |
| 2F | 9×10×25×75 | 2F, 3F, 4F | 9×10×19×69 | 3F, 4F | 9×10×25×75 |
| 2F | 10×10×25×75 | 2F, 3F, 4F | 10×10×22×72 | 3F, 4F | 10×10×25×75 |
| 2F | 11×12×25×85 | 2F, 3F, 4F | 11×12×22×79 | 3F, 4F | 11×12×35×85 |
| 2F | 12×12×35×85 | 2F, 3F, 4F | 12×12×26×83 | 3F, 4F | 12×12×35×85 |
| 2F | 13×12×35×85 | 2F, 3F, 4F | 13×12×26×83 | 3F, 4F | 13×12×35×85 |
| 2F | 14×12×35×85 | 2F, 3F, 4F | 14×12×26×83 | 3F, 4F | 14×12×35×90 |
| 2F | 15×16×40×95 | 2F, 3F, 4F | 15×12×26×83 | 3F, 4F | 15×16×40×95 |
| 2F | 16×16×40×95 | 2F, 3F, 4F | 16×16×32×92 | 3F, 4F | 16×16×42×95 |
| 2F | 17×16×30×95 | 2F, 3F, 4F | 17×16×32×92 | 3F, 4F | 17×16×40×95 |
| 2F | 18×16×30×95 | 2F, 3F, 4F | 18×16×32×92 | 3F, 4F | 18×16×40×95 |
| 2F | 19×20×35×110 | 2F, 3F, 4F | 19×16×32×92 | 3F, 4F | 19×20×50×110 |
| 2F | 20×20×50×110 | 2F, 3F, 4F | 20×20×38×104 | 3F, 4F | 20×20×50×110 |
| 2F | 22×20×50×110 | 2F, 3F, 4F | 22×20×38×104 | 3F, 4F | 22×20×50×110 |
| 2F | 24×20×60×125 | 2F, 3F, 4F | 24×25×45×121 | 3F, 4F | 24×20×60×125 |
| 2F | 25×20×60×125 | 2F, 3F, 4F | 25×25×45×121 | 3F, 4F | 25×20×60×125 |
| Rough 4F | 6×6×13×57 | Rough 4F | 20/22×20×38×104 | Rough 4F | 15/16×16×40×95 |
| Rough 4F | 7×8×16×66 | Rough 4F | 18/19×16×32×92 | Rough 4F | 17×16×40×95 |
| Rough 4F | 8×8×19×69 | Rough 4F | 24/25×25×45×121 | Rough 4F | 18×16×42×95 |
| Rough 4F | 9×10×19×69 | Rough 4F | 6×6×19×63 | Rough 4F | 19×20×50×110 |
| Rough 4F | 10×10×22×72 | Rough 4F | 7/8×8×22×66 | Rough 4F | 20×20×50×110 |
| Rough 4F | 11×12×22×79 | Rough 4F | 9/10×10×25×75 | Rough 4F | 22×20×50×110 |
| Rough 4F | 12/13/14/15×12×26×83 | Rough 4F | 11/12/13×12×35×85 | Rough 4F | 24×20×60×125 |
| Rough 4F | 16/17×16×32×92 | Rough 4F | 14×12×35×90 | Rough 4F | 25×20×60×125 |
FAQ
1. Where are your factory located? If I visit your factory, how can I go there?
Our factory located in Changzhou city, Jiangsu province.
2. What are your main products?
Our main products are carbide cutting tools, including end mill, face mill, drill bits etc.
3. What raw material you use?
We have rods with 3-4 types hardness, hrc45, hrc55, hrc60,hrc65.. Your work piece hardness decides what rods are suitable for.
5. How to ensure the quality?
We have precision detection machine, quality inspectors check cutters one by one.
6. How to deal with the cutters under verified?
These under verified cutters are all scraped.
7. I only have the drawings of work pieces? can you design cutters for me?
Yes, of course, show me work piece drawing, I will show you cutters’ drawing.
9. How long can you deliver goods?
If we have stock, goods will be shipped by next day, if not in stock, 7-35 days.
10. Can I choose the color of plastic pipe?
Yes, we have such as black, blue, red, yellow etc. color.
11. Can you make stickers with our logo and laser on cutters’ shanks?
Yes. We can print stickers with your logo and laser on shanks.
