CBN Turning Insert 42510H10
1. The performance advantages of CBN tools.
(1) It has high hardness and wear resistance. The microhardness of
CBN single crystal is HV8000 ~ 9000, which is the second highest
hardness material currently known. The hardness of CBN composite
sheet Generally HV3000 ~ 5000.
(2) It has high thermal stability and high temperature hardness.
The heat resistance of CBN can reach 1400-1500 ℃, and the hardness
at 800 ℃ is the normal temperature hardness of Al2O3/TiC ceramics.
(3) High chemical stability. CBN has high anti-oxidation ability,
no oxidation phenomenon occurs at 1000 °C, and no chemical reaction
occurs with iron-based materials at 1200 to 1300 °C.
(4) It has good thermal conductivity and low friction coefficient.
CBN tools are strongly interrupted machining
type | dimension(mm) | Basic grades |
∅D Tol. | C ±0.13 | ∅d ±0.13 | r | a≈ | P | M | K |
41005H | 10±0.08 | 3.5 | 4.2 | 0.5 | 2.4 | YNG151 | YT05 | YT15 | YC201 | YT14 | YT5 | YC45 | | YS8 | YS2T | YW1 | YW3 | YM201 | YW2 | YM30 | YG3X | YG3 | YM201 | YG6X | YG6 | YD201 | YG8 | |
41305H | 13±0.13 | 4.5 | 5.2 | 0.5 | 3.4 | | | ✬ | ✬ | ✬ | | | | ✬ | | | | ✬ | | | | | ✬ | | | | ✬ | |
41605H | 16±0.18 | 5.5 | 6.2 | 0.5 | 4.4 | | | ✬ | ✬ | ✬ | | | | ✬ | | | | ✬ | | | | | ✬ | | | | ✬ | |
41605H6 | 16±0.18 | 5.5 | 6.2 | 0.5 | 6 | | | | ✬ | ✬ | | | | | | | | ✬ | | | | | ✬ | | | | | |
41905H | 19±0.18 | 7.0 | 7.2 | 0.5 | 5.4 | | | | | | | | | | | | | ✬ | | | | | ✬ | | | | ✬ | |
41910H | 19±0.18 | 7.0 | 7.2 | 1.0 | 5.4 | | | | | ✭ | | | | | ✬ | | | ○ | | | | | | | | | | |
41910H7 | 19±0.19 | 7.0 | 7.2 | 1.0 | 7 | | | | | | | | | | ✬ | | | ○ | | | | | | | | | ✬ | |
42210H8 | 22±0.25 | 8.5 | 8.2 | 1.0 | 8 | | | | | | | | | | ✬ | | | ○ | | | | | | | | | ✬ | |
42510H7 | 25±0.25 | 9.5 | 8.2 | 1.0 | 7 | | | | | | | | | | ✬ | | | ○ | | | | | | | | | ✬ | |
42510H8 | 25±0.25 | 10.5 | 8.2 | 1.0 | 8 | | | | | | | | | | ✬ | | | | | | | | | | | | ✬ | |
42510H10 | 25±0.26 | 11.5 | 9.12 | 1.0 | 10 | | | | | | | | | | ✬ | | | | | | | | | | | | ✬ | |