Tablet Deblistering Machine Blister Packing Machine
Find out more about our Deblister range and see what system best
suit your requirements to minimize your cost in handling rejected
blister packs.
ETC-60N:
- Semi-automatic type, blister-by-blister manual feeding, roller
structure, adjustable spaces between blades, without replacement of
molds, with strong versatility. Its working efficiency is about 60
boards per minute, nicely applicable to any in-line arranged
blisters of capsules, soft capsule, big pills etc.
- Inapplicable to randomly arranged blisters, or blades may damage
pills. Results may be unsatisfactory with very small sized tablets;
when the diameter of tablets is less than 5mm and the thickness of
tablets is less than 3mm, results of deblistering are uncertain.
ETC-60A:
- Semi-automatic type, blister-by-blister manual feeding, die orifice
punching structure, four rotatable working positions, with a
working efficiency of 60 boards per minute, applicable to any
blisters.
- Compared with ETC-60, ETC-60A is safer to operate because the
feeding position is far away from the punching position. Therefore,
it will never hurt the operator’s finger even he/she is careless.
ETC-120A:
- Automatic type, with an automatic feeding module based on ETC-60N,
hence it has an efficiency of 120 boards per minute.
- To ensure a high running speed, blisters are required with high
standards or results will be effected just as qualities of empty
capsules effecting filling rates. Therefore, blisters should be
flat, neat and regularly arranged. Warped blisters will get stuck
during feeding and make the machine running unsmooth.