KOSOBO COMPANY LIMITED |
Verified Suppliers
|
|
KOSOBO Automatic Punch Machine Automatic Press For Tin Can Making
Product Introduction
The S-B9B automatic punching machine is suitable for punching tank
covers, electromagnetic shell covers, and shell bodies. The stacked
long iron sheets are pushed up through an hydraulic cylinder (which
can also be connected to the automatic feeding machine S-B18-2M),
and then fed into the feeding table one by one by a suction cup.
The reciprocating feeding push rod in the feeding table, in
conjunction with the punch timing, pushes the iron sheet into the
stamping die. The stamped can cover (or electromagnetic shell cover
body) is discharged from the rear through a capper (or
high-pressure air), while the iron sheet waste is discharged from
the side through a pressure wheel. The stamping die is made of
special alloy steel, which is sturdy and durable. The automatic
lubrication pump and multiple safety designs make maintenance easy
and operation safe.
Mechanical specifications
Mechanical number | S-B9B | |
Applicable tank diameter | 200 - 714D | Irregular ends |
Production capacity per minute | 200 - 404D Up to 200 EPM 404 - 603D Up to 160 EPM 603 - 714D Up to 120 EPM | Up to 120 EPM |
Requires horsepower | 3HP, 2HP, 1HP, 1/4HP EA. | |
Applicable iron sheet length | 510 - 915mm | |
Applicable iron sheet width | 64 - 220mm | |
Maximum Die Height | 250mm | |
Installation area and height | 3050 x 2980 x 1865 mm | |
Net weight | 4800 kgs |
Machine Parts Pictures