15 Meters Straight SDR 26pin to SDR 26pin Camera Link Cable for Long Distance Transmission full mode 85Hz

High Speed Camera Link Cable 15 Meters For Long Distance Transmission full mode 85Hz

Description:

SDR to SDR Camera link cable China manufacturer.Himatch's construct the cable of robotic cable with HONDA® SDR (Shrunk Delta Ribbon) 26pos at both end.They offer outstanding quality and high performance for industrial CCD camera with SDR port.

Features

Customized Connection Type:

MDR to MDR (straight / right angle / left angel / up angel / down angel)

SDR to SDR (straight / right angle / left angel / up angel / down angel)

MDR to SDR (straight / right angle / left angel / up angel / down angel)

Customized Cable Length: 0.5-15m

Application

Industrial imaging

Machine Vision system

Industrial camera

Scanning on pipelining

Products testing

Image recognition

Factory automation

Towed Cable wiring

In order to keep the good bending performance of the robot cable, improve the cable’s life time, and let the data transmission more stable, and prevent the accidental occurrence of the broken wire, it is very important obey the towing points

Bending radius.

The bending radius of the towed cable should be as big as possible. Recommended that the cable should be set ≥ 8D (D is the outer diameter of the cable)

Tow chain installation.

In the placement of towed cables, cables need to be tiled, cables can not be crossed or overlapped;

Select the tow chain with enough space to ensure that the cable occupies less than 30% space;

Install as many partitions as possible to avoid interference between cables.

Note:
The movable cable used for fixing will not have any problems . However, the fixing cable is NOT allow used for movable applications.
When installing the cable, please consider the allowable bending radius of the cable,if the bending degree exceeds the limit of the cable's internal structure or sheathed structure, it caused the deterioration of the cable's performance. Strongly recommend that the bending radius ≥ 4 R (R is the outer diameter of cable) when cable installed.