Free Installation Column Type Pay Off And Take Up Stands
PN1250-PN2500
1.Application: Column type Take-up with a wide range of applications and bobbins
due to their ability to move the columns.
2. Technical parameter of pay-off stand:
- Specification of pay off reel: PN1000 ~ PN2000
- Maximum load capacity: 4T
- The paying off tension is controlled by mechanical friction and can
be adjusted.
- The structure is shaftless, with electric lifting reel and electric
clamping or loosening reel.
- Lifting and clamping limit protection function
3.Technical parameter of take-up stand:
- Specification of take-up reel: Ø1250mm~Ø 2500mm (to be implemented
according to the demander's standard)
- Applicable cable diameter: Ø5 - Ø50mm
- Take-up speed: 0~35m/min
- Applicable coil weight: 12T
- Take-up motor: 4kw
- Take-up controller: variable frequency speed controller
- Wiring accuracy: 1-2% of the set pitch
- Wiring motor: 0.75kw
- Lifting motor: 0.75kw
- Clamping motor: 0.75kw
- Structural form: the whole machine is composed of base slide at the
bottom, two columns, independent motor driving column slide-type
lead screw movement, and independent electrical control box.
- The two spindle centers on the column are shaftless loading and
unloading spools. The centers are driven by two 0.75kw AC motors
through cycloidal pinwheel reducers to drive the screw nut to lift
and lower. Each center seat can be lifted and lowered separately or
simultaneously. It is equipped with mechanical and electrical dual
protection devices. In order to meet the use of different
specifications of spools, it is equipped with different
specifications of centers.
- The opening and closing system drives the screw rod and nut
horizontally through two independent motors, which are used to
clamp and loosen the wire coil, and is equipped with overload
protection device.
- The take-up adopts a torque motor, which drives the main shaft
through the 2-speed gearbox to drive the reel to rotate, and the
torque meter controller controls the take-up motor.
- The winding speed can be tracked
- The front operation surface of the take-up machine is equipped with
the start, stop and electric buttons of the whole machine to
facilitate the adjustment of the wiring operation.
Model | Inner diameter (mm) | Outer diameter (mm) | Max load (kg) |
PN1000M | 630 - 1000 | 300 - 750 | 1500 |
PN1250M | 800 - 1250 | 450 - 950 | 2500 |
PN1600M | 1000 - 1600 | 600 - 1200 | 4000 |
Feature:
Pushbutton or touchscreen Controls
Motorized or Mechanical Traverse
No timing belts or sheaves
Compact footprint
Easy to load
Emergency stop limit switch
AC Vector Drive(s)
PLC Control
Wide reel range
Heavy lifting capacity
Dancer or Torque Control
Wire Takeup power: AC motor + frequency converter + reducer;
Wire takeup speed control: automatically control the motor wire
feeding speed;
Brake: pneumatic brake;
Control system with PLC + HMI for the speed detection so that the
whole system work with the line speed in synchronization.