800W AC220V Outdoor Cabinet Air Conditioner,For Outdoor Telecom
Shelter/Room/Base Station
Product Characteristic
1. Description
The AC Air Conditioner is a full automation temperature control
product. It uses intelligent controller to control the whole system
of the air conditioner. According to the variation of environment
temperature, the intelligent controller can automatically detect,
operate and record the whole system’s operating time, power
consumption, event and historical data. It can store 100 event
records and 1280 historical data records, and can enquire 256 days’
daily record information. The product is widely applied in telecom
cabinet, small and medium sized telecom room, UPS room, outdoor
base station room, etc.
2.Features
(1)Strong adaptability
(2)High intelligence
(3)High precision
(4)High reliability
(5)Low noise
(6)Low energy consumption
(7)With 4 way switching value detection
(8)With 1 way room air conditioner control
(9) Voltage input range: 220VAC±25% 50/60Hz
(10) With dry contact alarm output
3.System Principle Diagram
Diagram 1: System Principle Diagram
4.Standard Compliance
| Standard | Description |
| GB/T 17626.7-1998 | Electromagnetic compatibility |
| GB4706.1 | Safety of household appliance and electrical appliance with similar
use. |
| GB4798.1 | Environmental conditions existing in the application for electric
and electronic products - storage |
| GB4798.2 | Environmental conditions existing in the application for electric
and electronic products - transportation |
| GB4798.3 | Environmental conditions existing in the application for electric
and electronic products - usage |
5.Technical Parameters
Environmental Performance | working environmental temperature | -20°C ~ 55°C |
| storage working temperature | -50°C ~ 70°C |
| working humidity | ≤95% |
| Thermal Performance | rated cooling capacity | 800W(L35 L35) |
| heating input power | 300(optional) |
Electrical Performance | rated input current | 2.35A(L35 L35) |
| rated input power | 517W(L35 L35) |
| input voltage | AC220V/50Hz (187V ~ 264V) |
Diagram 2: Dimension Diagram
6. Installation and Electrical Wiring
6.1 Preparation Before Installation
(1) Prepare the tools in the following table “Installation And
Maintenance Tools”.
(2)Check the air vents to ensure there’s no unnecessary items on
the vents.
6.2 Installation And Maintenance Tools
| Tools Name | Function |
| Cross Screwdriver | Fix air conditioner. |
| Small Slotted Screwdriver | Wire power supply port on the panel |
| Wire Stripper | Wire stripping |
| Wire Crimper | Crimp power supply for equipment |
| Multimeter | Check the wiring to ensure it’s correctly connected and without
short circuit. |
| Clamp Meter | Test operating current of the air conditioner |
6.3 Installation Steps
(1)Make sure the air conditioner is not connected with power.
(2)Fix the air conditioner according to the Dimension Diagram.
(3)Strip the insulation of the power supply wire, and crimp the
terminal.
(4)Connect the wires according to the Electrical Wring Diagram.
(5)After finishing the wiring, use the multimeter to check if the
electric circuit is normal. Then connect the air conditioner with
power supply, and use clamp meter to test the operating current.
Note: Make sure to disconnect all the power supply to the air
conditioner before installation. Choose proper wire diameter and
test operating current according to the technical parameters of the
air conditioner.
6. 4 Electrical Wiring Diagram
Diagram 3 Electrical Wiring Diagram
Wiring Ports:
L N PE : power supply port (voltage input: 220VAC±25% 50/60Hz)
A+ B- GND : communication port
AL1 AL2: general alarm output port
F+ F- : direct ventilation output port
N : not connected pin
7. After mechanical installation and electrical installation are
finished, check the installation items.
(1)Make sure the air conditioner is firmly installed.
(2)Check the electrical installation circuit, and ensure it doesn’t
have short circuit.
(3)Check the air outlet, air inlet, internal fan and external fan
of the air conditioner, and ensure they don’t have any odds and
ends.
(4)Connect the air conditioner to power supply, and test the power
supply (voltage input: 220VAC±25% 50/60Hz), operating current
1A±4%.
8. System Control
8.1 Control Board
(1)Technical Parameter
a.2×16 Chinese/English shift LCD display, user friendly;
b.Simultaneously display temperature and humidity inside the box
and communication room temperature;
c.Temperature measurement accuracy: 0.1 °C; humidity measurement
accuracy:5%;
d.Can store 180 days’ daily event record, 1 record every day;
e.Daily highest temperature, lowest temperature, average
temperature
f.Daily event record;
g.Save the former day’s daily data at 0:00 every day; Can query 180
days’ daily record information;
h.RS485 communication,RTU-Modbus protocol, support remote detection
and control;
i.Controllable air conditioner quantity:2 sets. 1 set of air
conditioner for communication room, and 1 set of small air
conditioner for thermostatic box.
j.Control mode: pulse (Non dry contact air conditioner), conducting
(dry contact air conditioner)
k.Real-time control air conditioner on/off
l.Power supply: AC85V~265V/50HZ；
m.Power consumption:≤5W；
n.Working environment: -30°C~70°C；<90%RH；
o.Installation method: guide rail,hanging;
p.Dimension(L*W*H):150mm×190mm×45mm
(2)Operating Instruction
It uses English interfaces, which can be operated easily. All the
operations can be realized with four buttons. The following is the
control board diagram:
Diagram 4 Control Board Diagram
8.2 Buttons
PgDn:page down button, confirm button.
Press once and release the button, page down;
A long press on the button, enter or exit parameter status;
At operating status: can select three display interfaces;
At parameter status: revise, confirm and parameter page down
button; a long press on the button to exit parameter status.
▲:increasing parameter revision. Page down button for event query.
▼:decreasing parameter revision. Page up button for event query.
PgUp: page up button; the function is oppose to PgDn operation.
8.3 Operating Interfaces
The controller includes four types of working modes: operating
mode, parameter mode, manual operating mode, and query mode.
(1) Operating Mode:
The mode is normal working mode. There are three operating
interfaces which can be selected. The three interfaces display
different content. When they are not selected, the interfaces will
automatically shift. Press the button “PgDn” to select next display
interface; press the button “PgUp” to select the previous display
interface.
Interface 1:
Line 1: temperature and humidity inside the thermostatic box (or
area I);
Line 2: box air conditioner status, real time clock;
※ ------- cooling start sign;
☼ ------- heating start sign;
♂ ------- hydrogen exhaust,/direct ventilation sign;
-- ------- compressor/ heater stop working.
Interface 2:
Line 1: temperature and humidity inside the communication room (or
area II);
Line 2: cabinet air conditioner status, real time date;
※------- cabinet air conditioner start sign;
-- ------- cabinet air conditioner off sign.
Interface 3:
Circularly display current alarms;
When multiple alarms occur, it will display each alarm information
circularly.
(2)Parameter Mode:
At operating status, long press on the button”PgDn” for around 3
seconds, or press the button”PgUp” at interface 1, to enter
parameter mode.The first entered interface is the main menu
interface, see the following diagram.
Press the button “▲”, “▼” to choose corresponding parameter group;
Press ”PgDn” to enter corresponding parameter group; Press ”PgUp”
to return to operating mode. The parameters selection includes:
(a) Observation Parameter (Apar Watch)
(b) Control Parameter Revision (Cpar Update)
(c) Basic Parameter Revision (Bpar Update)
(d) Manual Operation (A/M Select)
(e) Event Query (Event Query)
(f) Return To Operating Mode (Return)
(a)Observation Parameter Group (Apar):
Enter the interface to check some parameters which can’t be checked
at operating mode, see “9 Parameters”.
At parameter mode: on the left of line 1 is Parameter No. (PAnn);
on the right of line 1 is parameter value. Line 2 shows the remark
of the parameter.
(b) Control Parameter Group (CPar):
Enter the interface to observe or revise the parameters which can
be revised, see “9 Parameter”.
At parameter mode: on the left of line 1 is Parameter No. (PCnn),
on the right of line 1 is parameter value. Line 2 shows the remark
of the parameter.
(c) Basic Parameter Group (BPar):
Enter the interface to observe or revise the parameters which can
be revised, see “9 Parameter”.
At parameter mode: on the left of line 1 is Parameter No. (PBnn),
on the right of line 1 is parameter value. Line 2 shows the remark
of the parameter.
(d) Manual Operation:
Enter the interface to select “Cool”, “Heater”, “Air”, “Initpar”,
“Aoauto” to conduct manual start and stop operation.
(e) Event Query (Query):
Enter query mode
Specification sheet
| Place of Origin: Shenzhen, China (Mainland) | Rated Cooling Capacity : 800W |
| Brand Name: CYNRIN | Rated Heating Capacity:500W(optional) |
| Model: CCA008SA | Dimension: H×W×D 352*175*583mm |
| Product Name: Outdoor Cabinet Air Conditioner | Input Voltage: AC220V/50Hz |
| Certification: ISO9001, CE, 3C, | Rated Input Current: 2.2A |
| Cover Material: galvanized steel | Rated Input Power: 484W |
| Color: grey | Working Temperature: -20°C ~ +55°C |
| Protection Level: IP55 | Noise: ≤64dB |
| Installation Mode: door mounted | Refrigerant: R410a |
| Support OEM | Cooling Method: compressor, active cooling |
Product details
Dimension Diagram: H×W×D: 352*175*583mm
- Remote measuring, remote communication, remote control, which can
realize multiple automatic protection and comprehensive
self-testing function.
- Strict process control and famous brand components to ensure high
quality and reliability of this product
- Fit for harsh condition (T3),R134 a refrigerant
- Multiple self-protection design, RS485 communication port
(MODBUS-RTU protocol)
- LED display, all the setting can charge at the field.
- The heating function is optional
- Dry contact alarm output, NO/NC optional
- Anti-theft design, without the protection cover.
Installation Diagram
Application
The products are widely used in
- telecommunications,
- electric power
- industrial automation
- rail transit
- automobiles
- CNC machine tools and other fields.
- Indoor and Outdoor Battery Cabinet
- Wireless Indoor and Outdoor Cabinet
- Indoor and Outdoor Hybrid Base station
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 set |
| Price: | negotiation |
| Payment Terms: | T/T, L/C, etc |
| Supply Ability: | 1,0000 sets per month |
| Delivery Time: | 10-15 working days |
| Packaging Details: | carton + wooden case + pallet
|
FAQ
1. Q: How about the air cooler material?
A: It makes by 100% new plastic, pure copper for
motor.
2. Q: What voltages you can do, could you make special
voltages?
A: we can make DC48 and all AC
voltage products for you.
3. Q: I want to use our own brand, is it OK?
A: It is possible, we supply the OEM products
too.
4. Q: How about the warranty?
A: All the unit warranty is one year.
