4 Port BNC HD SD 3G SDI Seamless switcher 4x1 Switch 2.97Gb/s 1080P + IR Remote 1080p@60Hz

4 Port BNC HD SD 3G SDI Seamless switcher 4x1 Switch 2.97Gb/s 1080P + IR Remote 1080p@60Hz

WhatsApp:+86 13530635461

1. Introduction

SDI switcher is a high-performance with seamless switching, it can be four input SDI/HD-SDI/3G-SDI serial digital video signal source, after scaling into HD-SDI or 3G-SDI serial digital video signal seamless switch to the on HD display device. This product built-in automatic identification and compatible with SD-SDI, HD-SDI, 3G-SDI all format of SDI signal. It is the support 2.97Gbps bandwidth, and supports lossless transmission over long distances.

2. Features

 4 SDI input signal switch to 1 SDI sink devices.
 Support seamless switching

 Supports inputs SD-SDI(270Mb/s), HD-SDI(1.485Gb/s), 3G-SDI(2.97Gb/s) video format.

 Built-in cable equilibrium, clock recovery and drive.

 Supports outputs resolutions: 1080p@60Hz (3G) and 720p@60Hz (HD).

 Supports signal input and output distances of up to 300m for SD signals, 200m for HD signals and 100m for 3G signals.

 Supports remote control and on-panel control

 Supports 5-12V wide voltage input.

3. Package

 4x1SDI Seamless Switcher-----------------------------------------------------1PCS

 5V1ADCPowerSupplydapter --------------------------------------1PCS

 IRRemote control------------------------------------------------------ 1PCS

 Operation Manual ------------------------------------------------------- 1PCS

4. Specifications

 Frequency Bandwidth 3Gbps

 SDI Input Ports 4 x BNC Female input port

 SDI Output Ports 1 x BNC Female output ports

 Power Supply DC 5V 1A

 ESD Protection Human Body Model: ± 8kV (air-gap discharge) ± 4kV (contact discharge)

 Dimensions (mm) 70(W) X 145 (D) X 25 (H)

 Weight 350g

 Operating Temperature 0 ~ 40/ 32~ 104

 Storage Temperature -20 ~ 60/ -4 ~ 140

 Relative Humidity 20 ~ 90% RH (Non-condensing)

 Power Consumption (Max) 4W

5. Operation controls and Functions

Front Panel

1. IR: IR Receiver window (accepts the remote control signal of this device only).

2. POWER LED: This red LED illuminate when the device is connected with power supply.

3. INPUT LED: These inputs status indicating lamp.

   (1).Illuminate: SDI input signal stability.

   (2).Flashing: Input port is selected, but there is no input signal or the input signal is not stable

4. OUTPUT LED: Output rate status indicating lamp.

5. INPUT SELECT: Press the INPUT button to select an input from the 4 input sources.

6. RATE SELECT: Press the RATE button will change output rate(3G or HD).
Rear Panel

1. SDI OUTPUT: This slot is where you connect the SDI displays or monitors with coaxial cable (RG6).

2. SDI INPUT: These slots are where you connect the SDI source output from SDI Camera.

3. DC 5V-12V: Plug the 5V or 12V DC power supply into the unit and connect the adapter to AC wall outlet