Home Companies Shenzhen Bwin Precision Tools Co., Ltd.

60 Degrees Carbide Flat End Mill Coated HRC60 Steel Milling Cutter

Active Member

Contact Us

[China]

Address: No.1613, honghai Bldg., Songgang Rd., Baoan Area ,Shenzhen , China

Contact name:Judy Le

Shenzhen Bwin Precision Tools Co., Ltd.

60 Degrees Carbide Flat End Mill Coated HRC60 Steel Milling Cutter

Country/Region	china
City & Province	shenzhen

Product Details

Carbide Flat End Mills HRC60 4F 4 Flutes 60 Degrees Coated Tungsten Steel Milling Cutter

Characteristic:

Imported high-quality raw materials
High precision and hardness
Sharp and wear-resistant
High processing efficiency
Stable performance
Good impact resistance

Description:

The flat end mill is made of imported materials, with high precision, stable performance, high efficiency and long service life; It is processed with ultra-fine grain size grinding wheel, and there is no grinding wheel trace on the surface of the milling cutter, even if the blade is magnified 200 times, there is no slight defect; New nano gradient composite structure coating, with ultra-high nano hardness and good film substrate bonding force; Sharp blade, better impact resistance, wear resistance and durability; The universal chamfered round handle is convenient to use and has good compatibility. It can be clamped more tightly without slipping and enhance the seismic resistance of the milling cutter.

Milling Parameters:

HRC45 Carbide End Mill				Tool length		fz&v
				Short		1
				Long1		0.9
				Overlength		0.8
				Speciality		0.6
Type			Material	Strength N/mm² Hardness HRC	Cooling



					Air	Dry cutting	Lubricating fluid
P	PI	P1.1	Non alloy structural steel, free cutting structural steel, carburized steel and quenched and tempered steel	<700	√	√	√
	PI	P1.2	quenched and tempered steel	<1200	√	√	√
	P2	P2.1	Alloyed nitrided steel, carburized steel and quenched and tempered steel	<900	√	√	√
	P2	P2.2	Tool steel, bearing steel, spring steel and high-speed steel	<1400	√		√
	P3	P3.1	Tool steel, bearing steel, spring steel and high-speed steel	<900	√	√	√
	P3	P3.2	Tool steel, bearing steel, spring steel and high-speed steel	<1500	√		√
M	M1	M1.1	austenitic stainless steel	＜700	√		√
	M1	M1.2	Ferritic/austenitic (bicrystal) stainless steel	＜1000			√
	M2	M2.1	Austenitic stainless cast steel	＜700	√		√
	M3	M3.1	Ferritic/austenitic (bicrystal) stainless cast steel	＜1000			√
K	K1	K1.1	Flake graphite cast iron (gray cast iron), GJL	＜300	√	√	√
	K2	K2.1	Ductile iron, GJS	＜500	√	√	√
		K2.2	Ductile iron, GJS	500-800	√	√	√
		K2.3	Ductile iron, GJS	＞800	√	√	√
	K3	K3.1	Vermicular graphite cast iron, GJV; Malleable cast iron, GJM	＜500	√	√	√
	K3	K3.2	Vermicular graphite cast iron, GJV; Malleable cast iron, GJM	＞500	√	√	√
H	H1	H1.1	Hardened steel/cast steel	45-55	√	√	√
	H1	H1.2	Hardened steel/cast steel	55-64	√	√	√
	H2	H2.1	Wear resistant cast iron/chilled cast iron, GJN		√		√

Finish
Vc (m/min)				fz(mm/tooth)
				Diameter
				2	4	6	8	10	12	14	16	18	20
P	P1	P1.1	332	0.028	0.05	0.07	0.091	0.11	0.128	0.144	0.16	0.173	0.186
	P1	P1.2	272	0.026	0.046	0.066	0.085	0.103	0.12	0.135	0.15	0.162	0.173
	P2	P2.1	304	0.028	0.05	0.07	0.091	0.11	0.128	0.144	0.16	0.173	0.186
	P2	P2.2	212	0.023	0.041	0.059	0.076	0.092	0.107	0.121	0.134	0.145	0.155
	P3	P3.1	196	0.027	0.047	0.067	0.086	0.104	0.122	0.137	0.152	0.165	0.177
	P3	P3.2	168	0.024	0.043	0.061	0.079	0.095	0.111	0.125	0.139	0.150	0.161
	P4	P4.1	136	0.019	0.033	0.047	0.06	0.073	0.085	0.096	0.107	0.116	0.124
	P5	P5.1	204	0.027	0.048	0.068	0.088	0.106	0.124	0.140	0.155	0.168	0.18
	P6	P6.1	136	0.013	0.023	0.033	0.042	0.051	0.06	0.068	0.075	0.081	0.087
M	M1	M1.1	92	0.016	0.029	0.041	0.053	0.064	0.075	0.0845	0.094	0.101	0.108
	M1	M1.2	84	0.014	0.024	0.034	0.044	0.053	0.062	0.0695	0.077	0.0835	0.09
	M2	M2.1	100	0.018	0.031	0.045	0.057	0.07	0.081	0.0915	0.102	0.11	0.118
	M3	M3.1	92	0.014	0.025	0.035	0.045	0.055	0.064	0.072	0.08	0.0865	0.093
K	K1	K1.1	364	0.047	0.083	0.117	0.151	0.183	0.214	0.2405	0.267	0.149	0.031
	K2	K2.1	332	0.04	0.07	0.1	0.128	0.156	0.182	0.2045	0.227	0.245	0.263
		K2.2	272	0.033	0.058	0.082	0.106	0.128	0.149	0.168	0.187	0.202	0.217
		K2.3	152	0.019	0.033	0.047	0.06	0.073	0.085	0.096	0.107	0.1155	0.124
	K3	K3.1	240	0.033	0.058	0.082	0.106	0.128	0.149	0.168	0.187	0.202	0.217
	K3	K3.2	228	0.028	0.05	0.07	0.091	0.011	0.128	0.144	0.16	0.173	0.186
H	H1	H1.1	92		0.021	0.029	0.038	0.046	0.053	0.06	0.067	0.072	0.077
	H1	H1.2
	H2	H2.1

Note:

If the following carbide end mill cannot meet your requirements, we support OEM customized production. The diameter of 0.2mm to 25mm, the total length of 50mm to 200mm, 4F, 5F, 6F, 8F and logo can be customized, including inch size end milling cutter. Please contact us to select or customize non-standard carbide end mill according to your needs.

Specification	Flute Dia(D)	Flute Length (C)	Shank Dia(D)	Overall Length(L)
φ13d4*50L	1	3	4	50
φ1.54d4*50L	1.5	5	4	50
φ25d4*50L	2	5	4	50
φ2.57d4*50L	2.5	7	4	50
φ38d4*50L	3	8	4	50
φ410d4*50L	4	10	4	50
φ513d6*50L	5	13	6	50
φ615d6*50L	6	15	6	50
φ820d8*60L	8	20	8	60
φ1025d10*75L	10	25	10	75
φ1230d12*75L	12	30	12	75
φ1445d14*100L	14	45	14	100
φ1645d16*100L	16	45	16	100
φ1845d18*100L	18	45	18	100
φ2045d20*100L	20	45	20	100

Instructions:

1. Before using the carbide end mill, please measure the tool deflection. If the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.

2. The shorter the carbide e extends out of the collet, the better. If the tool extends out longer, reduce the speed, feed speed or cutting amount.

3. In case of abnormal vibration or sound during cutting, please reduce the speed and cutting amount until the situation is improved.

4. Spray type and air jet type are preferred for steel cooling, which can improve the use effect of carbide end mill.

5. Note: Not suitable for low speed machines such as rotary table and electric hand drill.

Applications:

Pre-hardened Steel, stainless steel, Die steel, steel plate, Heat-resistant steel,pipe, copper and aluminum, cast iron, Nonferrous Metal, Wood, Plastic,FRP and sO on. General-purpose operation slotting, rilling, profiling.

Cnc Milling Cutter 6mm 3 4 Flute Tungsten Solid Carbide High Feed Endmill End Mill