Home Companies Shenzhen Bwin Precision Tools Co., Ltd.

HRC65 Carbided Corner Radius End Mills D4 4 Flute Milling Cutter 4F Frese

Active Member

Contact Us

[China]

Address: No.1613, honghai Bldg., Songgang Rd., Baoan Area ,Shenzhen , China

Contact name:Judy Le

Shenzhen Bwin Precision Tools Co., Ltd.

HRC65 Carbided Corner Radius End Mills D4 4 Flute Milling Cutter 4F Frese

Country/Region	china
City & Province	shenzhen

Product Details

HRC65 Carbided Corner Radius End Mills D4 4 Flute Milling Cutter 4F Frese Endmills

Characteristic:

Hard and strong
Sharp cutting
Specular
High finish
Strong universality

Description:

High quality domestic superfine particle tungsten steel bar is used, which has strong versatility and is suitable for rough machining and fine machining
The surface is passivated, corrosion resistant and not easy to oxidize, further improving the surface finish of the carbide corner radius end mill, and ensuring the firmness and service life of the coating
The full grinding edge is smooth in cutting, and it is processed by high-quality machine tools to ensure the sharpness of the edge and smooth in cutting
Fine grinding of spiral groove on mirror surface, smooth chip removal, avoiding knife sticking, greatly improving production efficiency
The universal chamfered round shank has good compatibility, and enhances the shock resistance and cutting speed of the carbide corner radius end mill

Milling Parameters:

HRC45 Carbide Corner Radius End Mill				Tool length		fz&v
				Short		1
				Long1		0.9
				Overlength		0.8
				Speciality		0.6
Type			Material	Strength N/mm² Hardness HRC	Cooling



					Air	Dry cutting	Lubricating fluid
P	PI	P1.1	Non alloy structural steel, free cutting structural steel, carburized steel and quenched and tempered steel	<700	√	√	√
	PI	P1.2	quenched and tempered steel	<1200	√	√	√
	P2	P2.1	Alloyed nitrided steel, carburized steel and quenched and tempered steel	<900	√	√	√
	P2	P2.2	Tool steel, bearing steel, spring steel and high-speed steel	<1400	√		√
	P3	P3.1	Tool steel, bearing steel, spring steel and high-speed steel	<900	√	√	√
	P3	P3.2	Tool steel, bearing steel, spring steel and high-speed steel	<1500	√		√
M	M1	M1.1	austenitic stainless steel	＜700	√		√
	M1	M1.2	Ferritic/austenitic (bicrystal) stainless steel	＜1000			√
	M2	M2.1	Austenitic stainless cast steel	＜700	√		√
	M3	M3.1	Ferritic/austenitic (bicrystal) stainless cast steel	＜1000			√
K	K1	K1.1	Flake graphite cast iron (gray cast iron), GJL	＜300	√	√	√
	K2	K2.1	Ductile iron, GJS	＜500	√	√	√
		K2.2	Ductile iron, GJS	500-800	√	√	√
		K2.3	Ductile iron, GJS	＞800	√	√	√
	K3	K3.1	Vermicular graphite cast iron, GJV; Malleable cast iron, GJM	＜500	√	√	√
	K3	K3.2	Vermicular graphite cast iron, GJV; Malleable cast iron, GJM	＞500	√	√	√
H	H1	H1.1	Hardened steel/cast steel	45-55	√	√	√
	H1	H1.2	Hardened steel/cast steel	55-64	√	√	√
	H2	H2.1	Wear resistant cast iron/chilled cast iron, GJN		√		√

Finish
Vc (m/min)				fz(mm/tooth)
				Diameter
				2	4	6	8	10	12	14	16	18	20
P	P1	P1.1	332	0.028	0.05	0.07	0.091	0.11	0.128	0.144	0.16	0.173	0.186
	P1	P1.2	272	0.026	0.046	0.066	0.085	0.103	0.12	0.135	0.15	0.162	0.173
	P2	P2.1	304	0.028	0.05	0.07	0.091	0.11	0.128	0.144	0.16	0.173	0.186
	P2	P2.2	212	0.023	0.041	0.059	0.076	0.092	0.107	0.121	0.134	0.145	0.155
	P3	P3.1	196	0.027	0.047	0.067	0.086	0.104	0.122	0.137	0.152	0.165	0.177
	P3	P3.2	168	0.024	0.043	0.061	0.079	0.095	0.111	0.125	0.139	0.150	0.161
	P4	P4.1	136	0.019	0.033	0.047	0.06	0.073	0.085	0.096	0.107	0.116	0.124
	P5	P5.1	204	0.027	0.048	0.068	0.088	0.106	0.124	0.140	0.155	0.168	0.18
	P6	P6.1	136	0.013	0.023	0.033	0.042	0.051	0.06	0.068	0.075	0.081	0.087
M	M1	M1.1	92	0.016	0.029	0.041	0.053	0.064	0.075	0.0845	0.094	0.101	0.108
	M1	M1.2	84	0.014	0.024	0.034	0.044	0.053	0.062	0.0695	0.077	0.0835	0.09
	M2	M2.1	100	0.018	0.031	0.045	0.057	0.07	0.081	0.0915	0.102	0.11	0.118
	M3	M3.1	92	0.014	0.025	0.035	0.045	0.055	0.064	0.072	0.08	0.0865	0.093
K	K1	K1.1	364	0.047	0.083	0.117	0.151	0.183	0.214	0.2405	0.267	0.149	0.031
	K2	K2.1	332	0.04	0.07	0.1	0.128	0.156	0.182	0.2045	0.227	0.245	0.263
		K2.2	272	0.033	0.058	0.082	0.106	0.128	0.149	0.168	0.187	0.202	0.217
		K2.3	152	0.019	0.033	0.047	0.06	0.073	0.085	0.096	0.107	0.1155	0.124
	K3	K3.1	240	0.033	0.058	0.082	0.106	0.128	0.149	0.168	0.187	0.202	0.217
	K3	K3.2	228	0.028	0.05	0.07	0.091	0.011	0.128	0.144	0.16	0.173	0.186
H	H1	H1.1	92		0.021	0.029	0.038	0.046	0.053	0.06	0.067	0.072	0.077
	H1	H1.2
	H2	H2.1

Note:

If the following carbide corner radius end mill cannot meet your requirements, we support OEM customized production. The diameter of 0.2mm to 25mm, the total length of 50mm to 200mm, 4F, 5F, 6F, 8F and logo can be customized, including inch size carbide corner radius end mill. Please contact us to select or customize non-standard carbide corner radius end mill according to your needs.

Specification	Flute Dia(D)	R angle	Flute Length (C)	Shank Dia(D)	Overall Length(L)
Φ3R0.58d3*50L	3	0.5	8	3	50
Φ3R1.08d3*50L	3	1.0	8	3	50
Φ2R0.55d4*50L	2	0.5	5	2	50
Φ3R0.58d4*50L	3	0.5	8	3	50
Φ4R0.510d4*50L	4	0.5	10	4	50
Φ3R1.08d4*50L	3	1.0	8	3	50
Φ4R1.010d4*50L	4	1.0	10	4	50
Φ5R0.513d5*50L	5	0.5	13	5	50
Φ5R1.025d5*100L	5	1.0	25	5	100
Φ6R0.515d6*50L	6	0.5	15	6	50
Φ8R0.520d8*60L	8	0.5	20	8	60
Φ8R1.028d8*75L	8	1.0	28	8	75
Φ8R2.020d8*60L	8	2.0	20	8	60
Φ8R3.020d8*60L	8	3.0	20	8	60
Φ10R0.525d10*75L	10	0.5	25	10	75
Φ10R1.025d10*75L	10	1.0	25	10	75
Φ10R1.525d10*75L	10	1.5	25	10	75
Φ10R2.025d10*75L	10	2.0	25	10	75
Φ10R3.025d10*75L	10	3.0	25	10	75

Instructions:

1. Before using the carbide corner radius end mill, please measure the tool deflection. If the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.

2. The shorter the carbide e extends out of the collet, the better. If the tool extends out longer, reduce the speed, feed speed or cutting amount.

3. In case of abnormal vibration or sound during cutting, please reduce the speed and cutting amount until the situation is improved.

4. Spray type and air jet type are preferred for steel cooling, which can improve the use effect of carbide end mill.

5. Note: Not suitable for low speed machines such as rotary table and electric hand drill.

Applications:

Pre-hardened Steel, stainless steel, Die steel, steel plate, Heat-resistant steel,pipe, copper and aluminum, cast iron, Nonferrous Metal, Wood, Plastic,FRP and sO on. General-purpose operation slotting, rilling, profiling.

Cnc Milling Cutter 6mm 3 4 Flute Tungsten Solid Carbide High Feed Endmill End Mill