Active Member
|
[China]
Address: No.1613, honghai Bldg., Songgang Rd., Baoan Area ,Shenzhen , China
Contact name:Judy Le
Shenzhen Bwin Precision Tools Co., Ltd. |
|
|
Description
TNMG cutting tools are made by sintering tungsten carbide and cobalt powder, a matrix material with strong deformation resistance, and a special crystal structure of carbides, which endows the blade with high hardness, good toughness, and high temperature resistance, making the wear resistance of the rear blade surface stronger; Unique coating technology, delicate and smooth, without drip marks, reduces surface friction and reduces cutting resistance; The blade is sharp, with both sides and four corners available, and different R angles meet different smoothness requirements; Smooth chip breaking and removal, improving processing efficiency; Complete specifications, supporting non-standard customization.
Specifications:
Brand | BWIN |
Model | SNMG120408 |
Color | Colorful |
Workpiece | Steel/Stainless steel/chilled steel |
Type | Turning carbide Insert |
Material | Carbide Turning Tool |
Processing Type | Medium Cutting |
Standard | ISO |
Quantity | 10pcs/box |
Weight | 0.015kg |
Package | Plastic Box |
Customized Support | OEM, ODM |
Feature
Lead Time
antity(pieces) | 1 - 3000 | >3000 |
Lead time (days) | 7 | To be negotiated |
Parameters
I(mm) | d(mm) | t(mm) | d1(mm) |
09 | 9.525 | 3.18 | 3.81 |
12 | 12.7 | 4.76 | 5.16 |
15 | 15.875 | 6.35 | 6.35 |
19 | 19.05 | 6.35 | 7.93 |
Notice
The turning carbide inserts shall not be collided or dropped on the ground and must be handled with care.
Before installing the turning carbide inserts, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
After installation, it is necessary to confirm whether the central hole of the turning carbide inserts are firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
When using, do not exceed the specified high speed
When the turning carbide inserts are not used, hang the blade vertically on the dry shelf.
Applications
Our carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:
Advantage
FAQ
1. Flank Wear?
Higher cutting resistance,Notch wear on flank,Poor roughness of
surface, or deterioration of accuracy.
Soft grades,Excessive cutting speed,Small flank angle,Low feed.
Select a higher,wear-resistant grade,Reduce cutting speed,Increase
flank angle,Increase feed.
2. Crater Wear?
Uncontrolled chip,Poor surface quality,when finishing High speed
processing carbon steel
Soft grades,Excessive cutting speed,Excessive feed,The strength of
chip breaker Insufficiet.
Change to a higher wear-resistant grade,Reduce cutting speed,Reduce
feed,Select a higher strength chip breaker.
3. Chipping?
Sudden fracture of cutting edge(rake face and flank),Instability
insert life
Toughness insufficient,Excessive feed rate,Strength of cutting edge
insufficient,Instability of the tool.
Select a tougher grade,Decrease feed rate,Increase honing of
cutting edge(chamfering to rounding),Increase the stability and
setting angle
4. Insert Fracture?
Cutting resistance increased Poor surface roughness.
Toughness insufficient,Excessive feed rate,Strength of cutting edge
insufficient,Instability of the tool.
Select a tougher grade,Decrease feed rate,Increase honing of
cutting edge(chamfering to rounding),Increase the stability and
setting angle.
