But Weld Fittings Alloy 800H / Incoloy 800H / NO8810 / 1.4958
45 / 90 Deg Elbow Tee 10” SCH80S
Specifications
INCOLOY ALLOY 800H UNS NO8810 sheet :
1)Size:W1000mm x L2000mm
2)Thk:1mm-60mm
3)Standard:ASTM B409/ASM
INCOLOY ALLOY 800H UNS NO8810 sheet :
1)Size:W1000mm x L2000mm
2)Thk:1mm-60mm
3)Standard:ASTM B409/ASME SB409
Incoloy 800H Chemical composition:
Alloy | % | Ni | Cr | Fe | C | Mn | Si | Cu | S | Al | Ti |
800 | Min. | 30 | 19 | | | | | | | 0.15 | 0.15 |
Max. | 35 | 23 | balance | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 |
800H | Min. | 30 | 19 | | 0.05 | | | | | 0.15 | 0.15 |
Max. | 35 | 23 | balance | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 |
800HT | Min. | 30 | 19 | | 0.06 | | | | | 0.15 | 0.15 |
Max. | 35 | 23 | balance | 0.10 | 1.5 | 1 | 0.75 | 0.015 | 0.60 | 0.60 |
AI+Ti: 0.85-1.20 |
Incoloy 800H Physical properties
Density | 8.0 g/cm³ |
Melting point | 1350-1400 °C |
Incoloy 800H Alloy minimum mechanical properties in the room
temperature
Alloy | Tensile strength
Rm N/mm² | Yield strength
R P 0. 2N/mm² | Elongation
A 5 % |
800 | 500 | 210 | 35 |
800H | 450 | 180 | 35 |
800H Characteristic as below:
1.Excellent corrosion resistance in the water media of the
extremely high temperature of 500°C.
2.Good stress corrosion resistance
3.Good machining
Incoloy 800H Metallurgical structure:
800H is the face-centered cubic lattice structure, very low carbon
content and increased Ti:C rate improve the stability of the
structure, anti-allergy, and anti-intergranular corrosion. Low
temperature annealing around 950°C ensure the fine grain structure.
Incoloy 800H Corrosion resistance:
800H can not be corroded in many kinds of media. Its higher nickel
content made it have good stress corrosion resistance cracking
properties in the water corrosion condition. High chromium content
made it better resistance to pitting and crevice corrosion
cracking. This alloy can resist nitric acid and organic acid, but
it is not so fine in the sulfuric acid and hydrochloric acid.
800H have good corrosion resistance to both oxidation and
non-oxidizing salt, but maybe a little pitting in halide, and also
excellent properties in the mixture of water, smoke, steam, air and
carbon dioxide.
Incoloy 800H Application range and field:
1.Nitrate condenser---Corrosion resistance of Nitric acid
2.Steam heating pipes--Very good mechanical properties
3.Heat up element tube--Very good mechanical properties
|
| Product name : stainless steel reducing tee |
| Item : buttweld-Tee |
| Details : |
| Nominal Diameter | Outside Diameter | Center to End | | D1 | D2 | | DN | NPS | Series A | Series B | Series A | Series B | C | M | | 15×15×15 | 1/2×1/2×1/2 | 21.3 | 18 | 21.3 | 18 | 25 | 25 | | 15×15×10 | 1/2×1/2×3/8 | 21.3 | 18 | 17.3 | 14 | 25 | 25 | | 15×15×8 | 1/2×1/2×1/4 | 21.3 | 18 | 13.7 | 10 | 25 | 25 | | 20×20×20 | 3/4×3/4×3/4 | 26.9 | 25 | 26.9 | 25 | 29 | 29 | 20×20×15 | 3/4×3/4×1/2 | 26.9 | 25 | 21.3 | 18 | 29 | 29 | | 20×20×10 | 3/4×3/4×3/8 | 26.9 | 25 | 17.3 | 14 | 29 | 29 | | 25×25×25 | 1×1×1 | 33.7 | 32 | 33.7 | 32 | 38 | 38 | | 25×25×20 | 1×1×3/4 | 33.7 | 32 | 26.9 | 25 | 38 | 38 | | 25×25×15 | 1×1×1/2 | 33.7 | 32 | 21.3 | 18 | 38 | 38 | | 32×32×32 | 1.1/4×1.1/4×1.1/4 | 42.4 | 38 | 42.4 | 38 | 48 | 48 | | 32×32×25 | 1.1/4×1.1/4×1 | 42.4 | 38 | 33.7 | 32 | 48 | 48 | | 32×32×20 | 1.1/4×1.1/4×3/4 | 42.4 | 38 | 26.9 | 25 | 48 | 48 | | 32×32×15 | 1.1/4×1.1/4×1/2 | 42.4 | 38 | 21.3 | 18 | 48 | 48 | | 40×40×40 | 1.1/2×1.1/2×1.1/2 | 48.3 | 45 | 48.3 | 45 | 57 | 57 | | 40×40×32 | 1.1/2×1.1/2×1.1/4 | 48.3 | 45 | 42.4 | 38 | 57 | 57 | | 40×40×25 | 1.1/2×1.1/2×1 | 48.3 | 45 | 33.7 | 32 | 57 | 57 | | 40×40×20 | 1.1/2×1.1/2×3/4 | 48.3 | 45 | 26.9 | 25 | 57 | 57 | | 40×40×15 | 1.1/2×1.1/2×1/2 | 48.3 | 45 | 21.3 | 18 | 57 | 57 | | 50×50×50 | 2×2×2 | 60.3 | 57 | 60.3 | 57 | 64 | 64 | | 50×50×40 | 2×2×1.1/2 | 60.3 | 57 | 48.3 | 45 | 64 | 60 | | 50×50×32 | 2×2×1.1/4 | 60.3 | 57 | 42.4 | 38 | 64 | 57 | | 50×50×25 | 2×2×1 | 60.3 | 57 | 33.7 | 32 | 64 | 51 | | 50×50×20 | 2×2×3/4 | 60.3 | 57 | 26.9 | 25 | 64 | 44 | | 65×65×65 | 2.1/2×2/1/2×2.1/2 | 73.0 | 76 | 73.0 | 76 | 76 | 76 | | 65×65×50 | 2.1/2×2/1/2×2 | 73.0 | 76 | 60.3 | 57 | 76 | 70 | | 65×65×40 | 2.1/2×2/1/2×1.1/2 | 73.0 | 76 | 48.3 | 45 | 76 | 67 | | 65×65×32 | 2.1/2×2/1/2×1.1/4 | 73.0 | 76 | 42.4 | 38 | 76 | 64 | | 65×65×25 | 2.1/2×2/1/2×1 | 73.0 | 76 | 33.7 | 32 | 76 | 57 | | 80×80×80 | 3×3×3 | 88.9 | 89 | 88.9 | 89 | 86 | 86 | | 80×80×65 | 3×3×2.1/2 | 88.9 | 89 | 73.0 | 76 | 86 | 83 | | 80×80×50 | 3×3×2 | 88.9 | 89 | 60.3 | 57 | 86 | 76 | | 80×80×40 | 3×3×1.1/2 | 88.9 | 89 | 48.3 | 45 | 86 | 73 | | 80×80×32 | 3×3×1.1/4 | 88.9 | 89 | 42.4 | 38 | 86 | 70 | | 90×90×90 | 3.1/2×3.1/2×3.1/2 | 101.6 | - | 101.6 | - | 95 | 95 | | 90×90×80 | 3.1/2×3.1/2×3 | 101.6 | - | 88.9 | 89 | 95 | 92 | | 90×90×65 | 3.1/2×3.1/2×2.1/2 | 101.6 | - | 73.0 | 76 | 95 | 89 | | 90×90×50 | 3.1/2×3.1/2×2 | 101.6 | - | 60.3 | 57 | 95 | 83 | | 90×90×40 | 3.1/2×3.1/2×1.1/2 | 101.6 | - | 48.3 | 45 | 95 | 79 | | 100×100×100 | 4×4×4 | 114.3 | 108 | 114.3 | 108 | 105 | 105 | | 100×100×90 | 4×4×3.1/2 | 114.3 | 108 | 101.6 | - | 105 | 102 | | 100×100×80 | 4×4×3 | 114.3 | 108 | 88.9 | 89 | 105 | 98 | | 100×100×65 | 4×4×2.1/2 | 114.3 | 108 | 73.0 | 76 | 105 | 95 | | 100×100×50 | 4×4×2 | 114.3 | 108 | 60.3 | 57 | 105 | 89 | | 100×100×40 | 4×4×1.1/2 | 114.3 | 108 | 48.3 | 45 | 105 | 86 | | 125×125×125 | 5×5×5 | 141.3 | 133 | 141.3 | 133 | 124 | 124 | | 125×125×100 | 5×5×4 | 141.3 | 133 | 114.3 | 108 | 124 | 117 | | 125×125×90 | 5×5×3.1/2 | 141.3 | - | 101.6 | - | 124 | 114 | | 125×125×80 | 5×5×3 | 141.3 | 133 | 88.9 | 89 | 124 | 111 | | 125×125×65 | 5×5×2.1.2 | 141.3 | 133 | 73.0 | 76 | 124 | 108 | | 125×125×50 | 5×5×2 | 141.3 | 133 | 60.3 | 57 | 124 | 105 | | 150×150×150 | 6×6×6 | 168.3 | 159 | 168.3 | 159 | 143 | 143 | | 150×150×125 | 6×6×5 | 168.3 | 159 | 141.3 | 133 | 143 | 137 | | 150×150×100 | 6×6×4 | 168.3 | 159 | 114.3 | 108 | 143 | 130 | | 150×150×90 | 6×6×3.1/2 | 168.3 | - | 101.6 | - | 143 | 127 | | 150×150×80 | 6×6×3 | 168.3 | 159 | 88.9 | 89 | 143 | 124 | | 150×150×65 | 6×6×2.1/2 | 168.3 | 159 | 73.0 | 76 | 143 | 121 | | 200×200×200 | 8×8×8 | 219.1 | 219 | 219.1 | 219 | 178 | 178 | | 200×200×150 | 8×8×6 | 219.1 | 219 | 168.3 | 159 | 178 | 168 | | 200×200×125 | 8×8×5 | 219.1 | 219 | 141.4 | 133 | 178 | 162 | | 200×200×100 | 8×8×4 | 219.1 | 219 | 114.3 | 108 | 178 | 156 | | 200×200×90 | 8×8×3.1/2 | 219.1 | - | 101.6 | - | 178 | 152 | | 250×250×250 | 10×10×10 | 273.0 | 273 | 273.0 | 273 | 216 | 216 | | 250×250×200 | 10×10×8 | 273.0 | 273 | 219.1 | 219 | 216 | 203 | | 250×250×150 | 10×10×6 | 273.0 | 273 | 168.3 | 159 | 216 | 194 | | 250×250×125 | 10×10×5 | 273.0 | 273 | 141.3 | 133 | 216 | 191 | | 250×250×100 | 10×10×4 | 273.0 | 273 | 114.3 | 108 | 216 | 184 | | 300×300×300 | 12×12×12 | 323.9 | 325 | 323.9 | 325 | 254 | 254 | | 300×300×250 | 12×12×10 | 323.9 | 325 | 273.0 | 273 | 254 | 241 | | 300×300×200 | 12×12×8 | 323.9 | 325 | 219.1 | 219 | 254 | 229 | | 300×300×150 | 12×12×6 | 323.9 | 325 | 168.3 | 159 | 254 | 219 | | 300×300×125 | 12×12×5 | 323.9 | 325 | 141.3 | 133 | 254 | 216 | | 350×350×350 | 14×14×14 | 355.6 | 377 | 355.6 | 377 | 279 | 279 | | 350×350×300 | 14×14×12 | 355.6 | 377 | 323.9 | 325 | 279 | 270 | | 350×350×250 | 14×14×10 | 355.6 | 377 | 273.0 | 273 | 279 | 257 | | 350×350×200 | 14×14×8 | 355.6 | 377 | 219.1 | 219 | 279 | 248 | | 350×350×150 | 14×14×6 | 355.6 | 377 | 168.3 | 159 | 279 | 238 | | 400×400×400 | 16×16×16 | 406.4 | 426 | 406.4 | 426 | 305 | 305 | | 400×400×350 | 16×16×14 | 406.4 | 426 | 355.6 | 377 | 305 | 305 | | 400×400×300 | 16×16×12 | 406.4 | 426 | 323.9 | 325 | 305 | 295 | | 400×400×250 | 16×16×10 | 406.4 | 426 | 273.0 | 273 | 305 | 283 | | 400×400×200 | 16×16×8 | 406.4 | 426 | 219.1 | 219 | 305 | 273 | | 400×400×150 | 16×16×6 | 406.4 | 426 | 168.3 | 159 | 305 | 264 |
|
