Suzhou Kiande Electric Co.,Ltd. |
Verified Suppliers
|
|
Automatic Sandwich Packing Busbar Fabrication Equipment
Unilateral Manual Irregular Busduct Inspection Machine
1. The semi-automatic busbar production line can realize automatic
clamping from left to right and down to up which is convenient for
drilling and riveting.
2. The production line is flexibly compatible,suitable for busbar
with width 74.5mm-350mm.
3. The electrical control system can clamp at the same time or
separately.
4. The semi-automatic busbar assembly line is a cost-effictive
production line and more stable which can decrease the NG rate and
labour cost and increase the working efficiency.
5. The clamping is powered by air compressor 5-8MPA, which only
comsumes the air when operation and is more environment-friendly
comparing with the electrical comsumption of oil pressure.
Function introduction
Manual Busbar Inspection Line is mainly used for inspecting short straight busbar, elbow busbar, terminal busbar and etc.. It’s composed of two parts: fixture positioning and main inspection instruments. The fixture positioning part is operated manually while inspection instruments will test the busbar and generate the report automatically.
Equipment data on Manual busbar inspection line
No. | Parameters |
Model | KD-JCX/M-6 |
Busbar Height | 100mm~650mm |
Busbar Length | 500mm~3000mm |
Suitable Busbar Type | Irregular busbar |
Position Type | Unilateral |
Printing System | Bar code printing/ Report printing( optional) |
High Voltage Withstanding Test | 0~5000V |
Insulation Test | 1~1000V |
Grounding Test | 0~25A |
Power | 380~415VAC 50~60Hz 3kW |
Equipment Dimension | L6200mm*W800mm*H800mm |
Feature
Customized
testing report can be saved, printed on-site and recorded remotely.
Its format can be set according to customer’s requirements.
Fuction
HV withstanding test, insulation resistance test and grounding test