|
[China]
Trade Verify
Address: NO 123 Suzhou Dadao East Road Suzhou Jiangsu China
Contact name:Tina
Suzhou Kiande Electric Co.,Ltd. |
|
Verified Suppliers
|
|
|
Busbar Fabrication Equipment, Compact Busbar Assembly Machine
Grounding / Insulation Test Automatic Busbar Inspection Machine
1. Japan YASKAWA Servo Control and Driver
2. Friendly HMI
3. Automatic Calculate Length and Position
4. Flaring with Flexible Angle .
5. Less Labor but High Efficiency and High Accuracy
6. One Time Completed Length cutting and Flaring
Busbar production equipment
Kiande is specialized in manufacturing and customizing busbar production machines including manual production line, semi-automatic production line, automatic production line, automatic inspection machine, automatic packaging machine, automatic mylar forming machine, automatic mylar slitting machine, profile cutting machine, busbar processing machine, gas hydraulic press machine, joint bar processing center, welding robot, elbow production machine, NC position fixture and other machines related to busbar processing .
| No. | Parameters |
| Model | KD-JCX/NC-E/H-6 |
| Busbar Height | 100mm~650mm |
| Busbar Length | 1200mm~6000mm |
| Busbar Type | Straight length type |
| Position Type | Unilateral / Middle |
Working Efficiency | 2 min/piece(testing time is adjustable.) |
| Servo Nos | 2 axis( Z axis/X axis) |
Vision System | Phase error judgment( optional) |
Printing System | Bar code printing/ Report printing( optional) |
High Voltage Withstanding Test | 0~5000V |
| Insulation Test | 1~1000V |
| Grounding Test | 0~25A |
Power | 380~415VAC 50~60Hz 5kW |
| Equipment Dimension | L12000mm*W1200mm*H1900mm |
Introduction
Automatic Busbar Inspection Machine is composed of three parts, feeding positioning station, inspection station and discharge station. When the busbar enters the feeding position, the control system will select the right testing fixture to start testing from the information identified by bar code or previous assembly line. Three tests will be performed including HV withstanding test, insulation resistance test and grounding test. After test is finished, testing report will be generated. This report can be saved, printed on site and recorded remotely. Its format can be set according to customer’s requirements. Automatic inspection machine is mainly used for batch inspecting on the straight busbar. Elbow busbar type shall be tested on manual inspection machine.
